6
1.3 General Precautions
•
In case of malfunction do not repair the Cash Register by yourself. Please contact your
nearest dealer or sales representative.
•
Do not insert any metal objects such as screwdriver, paper clips etc. into your Cash
Register. This may damage your Cash Register or subject you to electrical shocks.
•
Clean your Cash Register from time to time with a soft, dry or slightly damp cloth.
Never use water or any volatile chemicals, such as gasoline for cleaning. This may
damage your Cash Register.
1.4 Printer Precautions
•
Never use the printer without a ribbon or without paper rolls.
•
Do not pull the paper out during the printing process.
•
Only use good quality paper free of wood pulp.
•
Do not attempt to move gears or the printing head by hand or with a screwdriver.
•
Immediately install new paper rolls when ”paper-near-end” is indicated.
•
Change the cassette ribbon as soon as the print becomes faint.
Thermal sensitive paper is necessary for thermal printers. The thermal paper should
weigh between 55 gr. and 72 gr. and have a thickness of 65
µ
m to 125
µ
m. Good print
quality will be achieved with middle sensitivity.
1.5 Initial Setup
•
Before using the register make sure that your local voltage corresponds with the
voltage indicated on the serial number plate at the rear of the register. This could
be either 115V/60Hz or 230V/50Hz.
•
Locate the register near a standard, grounded power outlet. No other electrical
appliances should be connected to the same outlet as this might interfere with the
proper functioning of the cash register.
•
A built in fully charged back-up battery enables you to use your cash register
immediately, even if it has been idle for quite a while.
