569277
3
Zoom out
Zoom in
Previous page
1/6
Next page
MALFUNCTION / MAINTENANCE
GB
PAPER JAM:
If too much paper is fed to the cutting system the
cutting system will jam. Proceed as follows:
- Operate the rocker switch (1) (fig. 1) to position
„bowed arrow“.
- Cutting system runs in reverse and frees excess
paper.
- Tear off the excess paper over the feed slot and
turn the rocker switch (1) to position „I“.
- The cutting system will run forward and cut the
remainder of the paper left in the cutting system.
- Continue shredding with less paper.
MOTOR PROTECTION:
The motor shuts down automatically, should it
become overloaded. Turn the machine off with the
rocker switch (1) (fig. 1). Allow the motor to cool
down for 15 to 20 minutes (depending upon room
temperature) and then continue shredding.
CHECKLIST IN CASE OF MALFUNCTIONS:
If the device does not function, check the following:
- is the plug connected to the mains?
- is the rocker switch (1) on?
- is there a paper jam?
Follow the instructions under „PAPER JAM“.
- has the motor been overloaded?
Wait until the motor has cooled, and then restart.
If none of the above applies, contact your
dealer.
Note: For spare parts, please contact your dealer.
3
<< The machine may not be operated by
more than one person at any given time!
The machine was designed for safe
operation by “one person only”.
<< During the shredding process no other
work may be performed on the machine
(for example cleaning, etc.).
<< Keep children
away from the machine.
This machine’s design and safety concept
are based on adult dimensions (feeder
route, safety cut-off switches, etc.) to ensure
that it can be operated safely by adults
only.
<< Repairs may only be performed by
trained personnel.
<< Keep all loose articles of
clothing, ties, jewelery,
long hair or other loose
objects away from
opening, injury may
result!
<< Never insert fingers into opening.
Serious injury may result!
<< In case of danger switch the
machine off with the mains switch,
or with the emergency switch, or
unplug the machine.
<< Always unplug the machine from
the mains power supply before
opening the machine.
STOP
IMPORTANT SAFETY NOTES
1
fig. 1
TECHNICAL DATA
Cutting width: 3,8 mm (strips)
Cutting capacity: 4-5 sheets (70g/m
2
)
Supply voltage: 230V/50Hz
240V/50Hz
120V/60Hz
100V/50/60Hz
Pre-fusing: 10 amps (slow-blow)
Workin width: 220 mm
Noise generation: approx. 65 dB(A)
Power: 70 W
Short-time operation: S2-20 min
Dimensions:
Width: 310 mm
Depth: 260 mm
Height: 445 mm
Weight: approx. 4,3 kg
OPERATION
EXPLANATION OF THE CONTROLS:
1 = Rocker switch (fig. 1)
(forward / stop / reverse)
This switch is for the following functions:
- position I
cutting systems runs forward
- position 0
machine is switched off
- position bowed arrow
cutting systems runs backwards
FEEDING THE PAPER:
- Turn machine on with rocker switch (1) (fig. 1)
(position „I“).
- The cutting system runs forward.
- Feed paper through the inlet guide to the
cutting system.
- After shredding turn machine off with rocker
switch (position „0“)
Never feed the shredder with a
quantity of paper exceeding the
maximum indicated in the technical
details.
Should the machine be overfed, follow
the instructions under „PAPER JAM“.
EMPTYING THE RECEPTACLE:
- Take the machine by the moldings on each
side and lift it up.
- The receptacle can be emptied easily.
- After the machine has been reset onto the
receptacle, you can continue shredding.
50.4
OLYMPIA
INITIATION
SCOPE OF APPLICATION:
The document shredder Olympia 50.4 is a
machine for the destruction of common written
material.
The unit should only be fed with paper!
Shredding other types of materials can
cause injuries (e.g. by splinters of hard
materials) or may damage the shredder
(e.g. destruction of the cutting system).
INSTALLATION:
- Unpack and set machine upright.
- Take the machine by the moldings on each
side and put it onto the cabinet (trip switch at
the back).
- Plug in the machine (for instructions for the
necessary precautions see „TECHNICAL
DATA“.
The mains connection at the machine
must be freely accessible!
Only operate the machine in enclosed
rooms at temperatures between 10
°
C
and 40
°
C!
10
OLYMPIA
50.4
SB-No.
991.0216.4
Seite/page 2
SCHALTBILD / WIRING DIAGRAM / PLAN DE MONTAGE / SCHAKELSCHEMA
DIAGRAMA ELÉCTRICO / ESQUEMA ELECTRICO / SCHEMA ELETTRICO
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olympia 50.4 - 675 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olympia 50.4 - 675 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info