424157
115
Zoom out
Zoom in
Previous page
1/127
Next page
105
MAINTENANCE
+
CHECK IF:
the operator console is properly closed;
the thickness of the document lies within the
specified limits;
the document is folded or crumpled;
the document is correctly inserted in the slot;
a document is jammed inside the machine;
the feed rollers are dirty.
You cannot send a document.
PROBLEM
You cannot feed in the document.
You cannot receive a document. the facsimile machine is switched on;
there is no paper left and the memory is full;
paper is jammed inside the machine and the memory
is full;
with a telephone connected to the telephone socket of
the facsimile machine, the dialling tone can be heard (if
not, call the Customer Engineering Service).
You cannot print a document received in the
memory.
there is paper left;
paper is jammed inside the machine.
You cannot have a telephone conversation on
the facsimile machine.
The telephone is connected correctly to the telephone
socket of the facsimile machine.
A document received or copied is not automa-
tically reduced.
the “REDUCTION” parameter has been enabled in the
operating configuration (see the “Setting the operating
configuration parameters” section of the “PROGRAM-
MING” chapter).
The document received is completely blank.
The document sent is completely blank.
The document received is very light.
The document received is very dark.
There are vertical lines on the document
received.
There are vertical lines on the document copied.
the optical reader glass is dirty.
the printing nib is clean (see paragraph B1 of the
“Checking the print head nozzles” section).
the optical reader glass of the sending unit is dirty.
the document sent is very dark.
the document sent is very light.
the document was inserted face down into the facsimile
machine.
the sender inserted the document correctly into his
facsimile machine
the facsimile machine is switched on;
the document is inserted correctly;
the receiving unit is set for reception.
when a telephone is connected to the telephone socket
on the facsimile machine, a dialling tone can be heard
(if not, call the customer engineering service).
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ofx 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ofx 2100 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info