EG–VERKLARING VAN OVEREENSTEMMING van de FABRIKANT volgens ISO/IEC 17050
MANUFACTURER’S CE DECLARATION of CONFORMITY according to ISO/IEC 17050
OLIVETTI S.p.A Via Jervis, 77 - IVREA (TO) - ITALY
Verklaart onder eigen verantwoordelijkheid dat:
Declares under its sole responsibility that:
het in deze handleiding beschreven product
the product described in this guide
in OVEREENSTEMMING is met de Richtlijn 1999/5/EG van 9 maart 1999
is in compliance with directive 99/5/EC dated 9
th
march 1999
en voldoet aan de fundamentele vereisten van Elektromagnetische compatibiliteit en Veiligheid zoals voorzien
door de Richtlijnen:
fulfill the essential requirements of Electromagnetic Compatibility and of Electrical Safety as prescribed by the
Directives:
89/336/EEG van 3 mei 1989 en latere wijzigingen (Richtlijn 92/31/EEG van 28 april 1992 en Richtlijn
93/68/EEG van 22 juli 1993);
89/336/EEC dated 3
rd
May 1989 with subsequent amendments (Directive 92/31/EEC dated 28
th
April 1992 and Directive
93/68/EEC dated 22
nd
July 1993);
2006/95/EG van 27 december 2006;
2006/95/EC dated 27
th
December 2006;
zijnde ontworpen en geconstrueerd in overeenstemming met de volgende geharmoniseerde normen:
since designed and manufactured in compliance with the following European Harmonized Standards:
EN 55022/A2 : 2003 (Limits and methods of measurements of radio interference characteristics of Information Technology
Equipment) / Class B;
EN 61000-3-2/A1 : 2002 (Electromagnetic Compatibility (EMC) - Part 2 : Limits - Section 2 : Limits for harmonic current
emissions (equipment input current ≤ 16 A per phase);
EN 61000-3-3/A1 : 2002 (Electromagnetic Compatibility (EMC) - Part 3 : Limits - Section 3 : Limitation of voltage
fluctuations and flicker in low voltage supply systems for equipment with rated current up to and including 16A);
EN 55024/A1 : 2002 (Electromagnetic Compatibility - Information technology equipment - Immunity characteristics -
Limits and methods of measurement);
EN 60950-1/A1 : 2004 (Safety of Information Technology Equipment, including electrical business equipment).
Het product voldoet bovendien aan de volgende voorschriften:
Moreover the model is in compliance with following Standards:
ETSI TBR 38 : May 1998 Requirements for a terminal equipment incorporating an analogue handset function capable of
supporting the justified case service when connected to the analogue interface of the PSTN in Europe.
ETSI ES 203 021 : January 2006 Access and Terminal (AT); Harmonized basic attachment requirements for Terminals for
connection to analogue interfaces of the Telephone Networks.
ETSI EN 301 406 : 2003 Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced
Cordless Telecommunications covering essential requirements under article 3.2 of the R&TTE Directive Generic radio.
ETSI EN 301 489-6 : 2002 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic
compatibility (EMC) standard for radio equipment and services; Part6: specific conditions for Digital Enhanced Cordless
Telecommunications (DECT) equipment.
ETSI EN 301 489-1 : 2005 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic
compatibility (EMC) standard for radio equipment and services; Part1: Common technical requirements.
De overeenstemming met de bovengenoemde fundamentele vereisten wordt aangetoond door de op het product
aangebrachte CE-markering.
Compliance with the above mentioned essential requirements is shown by affixing the CE marking on the product.
Scarmagno, 08 Maart 2007 Olivetti S.p.A.
Scarmagno, 8
th
march 2007
Opmerkingen: 1) De CE-markering werd aangebracht in 2007.
Notes: 1) CE Marking has been affixed in 2007.
2) Het kwaliteitssysteem is in overeenstemming met de normen serie UNI EN ISO 9000.
2) The Quality System is in compliance with the UNI EN ISO 9000 series of Standards.
Olivetti S.p.A. Sede Sociale Ivrea,Via Jervis,77 – Cap. Soc. Euro 154.000.000 – C.C.I.A.A. Torino n. 547040 – Trib Ivrea Reg. Soc. n. 1927 – Cod. Fisc. e Part. IVA 02298700010
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Olivetti fax lab 145d at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Olivetti fax lab 145d in the language / languages: Dutch as an attachment in your email.
The manual is 3,99 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
