550339

Oceanic TDX5 Titanium Regulator Manual

6
Zoom out
Zoom in
Previous page
1/17
Next page
6
TDX5
Experience and experimentation will be your best guide to choosing the orien-
tation that is best to satisfy your needs and preference.
Installing Hoses:
After having determined the type of hose and preferred orientation -
• Remove the port plugs from those ports to be used by turning them counter
clockwise with a 5/32" hex key. Save the port plugs for possible future
use.
• Lightly lubricate the hose-end threads and o-ring with Christo-Lube
MCG111 lubricant.
• Thread the hose clockwise into the port until secure, then tighten it with an
open end wrench of the appropriate size to a torque of 40 in-lbs.
• • Second stage - 9/16" wrench
• • LP inflator - 9/16" (or 1/2") wrench
• • HP gauge or integrated computer - 5/8" wrench
• After all hoses are connected, test the complete regulator assembly by at-
taching it to an appropriate tank, pressurizing the system, and carefully lis-
tening for leakage of breathing gas.
REMOVAL OF HOSES
WARNING: At least one Second Stage must be connected
to the First Stage to facilitate purging of breathing gas from
the First Stage.
To remove a Hose from the First Stage -
• Ensure that the regulator system is purged of all breathing gas.
• Loosen and remove the Hose by turning it in the counter clockwise direc-
tion with an open end wrench of the appropriate size.
REGULATOR ATTACHMENT TO A TANK
WARNING: Maximum working pressure for an Oceanic
Yoke style connector is 3500 psi / 232 BAR and for a DIN
style connector is 4500 psi / 300 BAR
Yoke Style Connector
Before attaching the regulator to the tank:
• Slowly open then close the tank valve to allow a momentary flow of
breathing gas to blow any moisture or contaminants from the breathing
gas opening in the tank valve.
• Examine the sealing o-ring located on the tank valve to ensure that it is not
cut, frayed, or deteriorated. Replace the o-ring if it is damaged.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic TDX5 Titanium Regulator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic TDX5 Titanium Regulator in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info