550341

Oceanic DIN USA Converter Manual

10
Zoom out
Zoom in
Previous page
1/12
Next page
10
O2 Tech Reg
ADDITIONAL SPECIFICATIONS FOR CONNECTING COMPONENTS TO
OCEANIC REGULATOR FIRST STAGES
Second Stage (Primary or Octopus):
• Nominal Source Pressure = 140 psi (9.5 BAR) ± 5 psi (.5 BAR)
• Maximum Source Pressure = 155 psi (11 BAR)
• Thread Size = 3/8 - 24 UNF
• Inhalation Effort = 1.1 to 1.3 ciw* (cubic inches of water)
* Delta 3 model = adjustable from 0.0 to 2.5 ciw
• Exhalation Effort = 1.1 ciw*
• Flow Rate = 30+ scfm (standard cubic feet per minute)
• Work of Breathing is equal to or better than USNavy and CEN
Pressure Gauge or Pressure Transmitter:
• Maximum Source Pressure = 5000 psi (350 BAR)
• Thread Size = 7/16 - 20 UNF
GUIDELINE FOR MINIMUM SERVICE INTERVALS
Due to variations of use and storage time that Oceanic Regulator equipment may
be subjected to, the Guidelines and defined Intervals given herein are subject to
the discretion of the owner of the specific product. Inspection and/or service
indicated must be performed only by an Authorized Oceanic Dealer.
Personally owned equipment used for recreational diving activity:
• Equipment used 100 dives or less per year should be serviced at least once
per year.
• Equipment used more than 100 dives per year should be serviced after 100
dives, prior to further use.
• Equipment stored for more than 6 months should be inspected, and serviced
as required, prior to use.
Equipment used for dive training and/or consumer rental activities:
• Equipment should be inspected prior to every use.
• Equipment should be serviced at least once every 6 months, regardless of
use, and after 100 dives prior to further use.
• Equipment stored for more than 3 months should be inspected, and serviced
as required, prior to use.
Regardless of ownership or intended use:
• Equipment should be inspected and serviced if it displays any sign of leak-
age, malfunction, or freeflowing.
• Equipment should be inspected and serviced if the First Stage Inlet Filter
shows any sign of residue or discoloration.
• Equipment should be inspected and serviced if it displays signs of improper
performance or breathing effort.
• Equipment should be inspected and serviced if O-rings or Hoses display any
signs of deterioration.
… 10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic DIN USA Converter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic DIN USA Converter in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info