Manual Numark PT-01USB (page 4 of 20) (English, German, French, Italian, Spanish)

618183

Zoom out

Zoom in

1/20

PRODUCT FEATURES

1. Platter: Place your record on the platter.

2. Control Panel: Please see detailed

description of control panel features below.

3. Onboard Speaker: This speaker outputs

audio from the turntable.

4. Tone Arm Clip: Use this clip to secure the

tonearm when storing and transporting the

unit.

5. Tonearm: This unit comes with a ready-to-

use pre-balanced tonearm and cartridge. The

cartridge is user-replaceable with parts from

your distributor located in the warranty guide.

Please note that the platter starts spinning

once the tonearm is lifted over the record.

6. 45 Adapter: Use this adapter when playing 45

RPM records.

7. Dust Cover: This cover protects the turntable from

dust and abuse while not in use or while in

transport.

8. Dust Cover Latch: This latch holds the dustcover

securely in place, and can easily be opened by

sliding it to the left.

9. Handle: Use this handle to carry the unit.

10. Battery Cover: Holds the batteries securely in

place during use and transport. It easily slides open

and closed as indicated on the battery cover.

NOTE: This unit uses 6 “D” cell batteries (not

included).

OUTPUT PANEL FEATURES

1. Power Switch: Use this switch to turn power on and

off.

2. AC In: If you would like to power the unit externally,

plug the included power adapter into a power outlet,

then turn on the unit.

NOTE: This unit can also be powered by 6 “D” Cell

batteries (Not Included).

3. Master Output (RCA): This line level output is for

connecting the PT01USB to the input of an external

audio device such as a DJ mixer, tape recorder, CD

Burner, PA system, powered speaker, or a home

stereo. The level of the master stereo output signal

is controlled by the audio level control.

4. 1/8” Headphone Jack: Connect 1/8” headphones

to this audio output.

Note: Make sure the volume control is set to the

OFF position before plugging in any headphones to

avoid permanent hearing damage.

5. 1/4” Headphone Jack: Connect ¼” headphones to

this audio output.

Note: Be sure the volume control is set to the OFF

position before plugging in any headphones to avoid

permanent hearing damage.

6. USB Audio Output: Use the included USB Cable

to connect your turntable to your computer. Refer to

the software instruction guide before plugging in

your turntable. Please note that the turntable

cannot be powered through the USB connection.

7. Gain: This knob can be used to adjust the gain level

of the audio signal from the turntable. If the audio

from the turntable is too quiet or too loud, use this

knob to adjust the volume setting.

8. 1/8” Stereo Line Input: Connect Tape Players,

Reel to Reel, or any other audio source here. This

signal is sent to the computer through the USB

connection. Make sure that your phono cartridge

is installed while using this input for maximum

sound quality. Also make sure that your RCA

jacks are either plugged into an input device or not

in contact with metal.

Note: The 1/8" audio input is not routed to the

turntable's RCA output jacks, only to your computer

via USB.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark PT-01USB in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark PT-01USB Manual

Product: