Manual Numark Orbit Editor (page 5 of 14) (English, German, French, Italian, Spanish)

618137

Zoom out

Zoom in

1/14

Pads

To adjust the pads' MIDI messages:

1. Select a pad by clicking it on the graphical interface. Its values will appear in the Edit

Mappings panel below.

2. Set the pad's MIDI note number by clicking the Note field and dragging up or down.

Alternatively, you can manually enter a value by typing it in.

3. Set the pad's MIDI channel by clicking the Channel field and select the channel number.

4. Set the pad's mode by clicking the Mode drop-down menu and selecting the mode:

• Momentary: The pad will send its MIDI message for as long as you press and hold it

down. It will stop when you release it.

• Toggle: The pad will send its MIDI message continuously after you press it once. It

will stop when you press it again.

5. Set the pad's light color by clicking one from the palette on the right.

6. Repeat Steps 1-5, if desired.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark Orbit Editor in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark Orbit Editor Manual

Product: