Manual Numark NDX200 (page 5 of 20) (English, German, French, Italian, Spanish)

618157

Zoom out

Zoom in

1/20

REAR PANEL FEATURES

1. VOLTAGE SELECTOR --- Set this switch to the voltage

for your location.

2. POWER PLUG CONNECTOR – Plug your supplied

power cord in here.

3. POWER SWITCH – Turn the machine on and off with

this button. The unit should always be shut down with

this button first before any external power is removed.

Typically it is recommended that the CD player is

powered on before amplifiers and powered off after

amplifiers.

4. RCA AUDIO CONNECTORS – Connect your CD

player to your mixer from this line level output.

5. REMOTE START CONNECTOR – To use this connector for fader start, connect a fader start cable (not included) to a

fader start-compatible mixer. Every time you move the crossfader on the mixer over to the side that the unit is on, it will

automatically start playing. When you move the fader away from that side, the unit will stop. Moving the fader back to

the unit side will start play again.

LCD FEATURES

1. PLAY / PAUSE – This shows when

the unit is playing or paused.

2. CUE – Flashing when the unit is

setting a cue point. Lit continuously

when the unit is paused at a cue

point.

3. TRACK NUMBER – Shows the

current track number.

4. MINUTES – Shows the minutes

elapsed or remaining depending on

mode setting.

5. SECONDS – Shows the seconds

elapsed or remaining depending on mode setting.

6. FRAMES – The CD player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or

remaining depending on mode setting.

7. SEARCH – When engaged, search mode will allow you to use the jog wheel to quickly scan through the current track.

8. TIME MODE – Indicates whether the time shown on the LCD is the elapsed time for the track, remaining time for the

track, or total remaining time for the entire CD.

9. TIME BAR – Shows either time remaining or elapsed depending on the setting of the TIME button.

10. PROGRAM – Indicates that a program is playing.

11. SINGLE – Shows when the unit is set to play just one track at a time (Single Play Mode). This function is controlled by

the SINGLE button.

12. CONTINUOUS – Shows when the unit is set to play tracks continuously, without stopping (Continuous Play Mode). This

function is controlled by the SINGLE button.

13. LOOP – Indicates when a loop is programmed. When the indicator is flashing, a loop is currently playing. When "IN /

OUT" is shown, a loop is programmed but not currently playing.

14. PITCH – Shows the percentage change in pitch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark NDX200 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark NDX200 Manual

Product: