Manual Numark Im1 (page 5 of 20) (English, German, French, Italian, Spanish)

618172

Zoom out

Zoom in

1/20

REAR PANEL FEATURES

1. AC IN – Use the included power adapter to connect the

mixer to a power outlet. While the power is switched off,

plug the power supply into the mixer first, then plug the

power supply into a power outlet.

Note: The mixer is designed to work with the included

power supply only. Using an incompatible power supply

could result in damage to the unit.

2. MASTER OUTPUT (RCA) – Use standard RCA cables

to connect this output to a speaker or amplifier system.

The level of this output is controlled by the MASTER

knob on the top panel.

3. LINE INPUTS (RCA) – Connect line-level devices, such

as CD players, samplers or audio interfaces, to these

inputs.

4. PHONO INPUTS (RCA) – Connect phono-level devices, such as turntables, to these inputs.

5. GROUNDING TERMINAL – If you are using phono-level turntables with a grounding wire, connect the grounding wire to

these terminals. If you experience a low “hum” or “buzz”, this could mean that your turntables are not grounded.

Note: Some turntables have a grounding wire built into the RCA connection and, therefore, nothing needs to be

connected to the grounding terminal.

TOP PANEL FEATURES

1. POWER LED – Illuminates when the mixer is on.

2. MASTER – This control adjusts the output volume of the

Program mix.

3. MIC GAIN – Adjusts the audio level of the microphone

signal.

4. CUE GAIN – Adjusts the level of the headphone audio.

5. CUE SLIDER – Slide this to mix between Channels 1

and 2 in the headphones. When all the way to the left,

only Channel 1 will be heard. When all the way right,

only Channel 2 will be heard.

6. CHANNEL GAIN – Adjusts the corresponding channel’s

pre-fader and pre-EQ gain level.

7. CHANNEL TREBLE – Adjusts the high (treble)

frequencies of the audio on the corresponding channel.

8. CHANNEL BASS – Adjusts the low (bass) frequencies

of the audio on the corresponding channel.

9. INPUT SELECTOR – Selects the input source to be

routed to the corresponding channel. Input jacks are

located on the rear panel.

10. CHANNEL FADER – Adjusts the audio level on the

corresponding channel.

11. CROSSFADER – Blends audio playing between

Channels 1 and 2. Sliding this to the left plays channel

1 and sliding to the right plays Channel 2.

Note: The crossfader is user-replaceable if it should

ever wear out. Simply remove the facepanel, then

remove the screws holding it in position. Replace the

fader with a quality authorized replacement from your

local Numark retailer only.

12. MIC INPUT – Connect ¼” microphones to this input.

The microphone controls are located on the top panel.

13. HEADPHONES – Connect your ¼” headphones to this

output for cueing and mix monitoring.

14. DOCK * – Connect your iPod here. Gently rock the

iPod back and forth over the connector when attaching

or removing it.

15. DOCK ADJUSTER – Turn this knob accordingly so

your docked iPod rests against the support.

234

1010

12 13

* To record the Program mix to an iPod:

1. Connect the iPod to the DOCK.

2. In the iPod, go to Extras  Voice Memos and select

Record Now.

3. When you are finished recording, stop and save it.

Note: You cannot play a track from the iPod and record to

it at the same time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Numark Im1 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Numark Im1 Manual

Product: