23424
10
Zoom out
Zoom in
Previous page
1/12
Next page
CM100
- The Leader in DJ Technology
©1999 Industries - 10 - http://www.numark.com
REAR PANEL FEATURES
27
28
29
30
31
33
36
32
35
34
38
37
39
40
27. Phono Inputs – for attaching your turntables. When
these connectors are used, your signal is fed directly to the
high-quality RIAA phono pre-amplifiers.
Use this
position only for turntables
. Line level sources will
overload the sensitive phono pre-amps and will cause
distortion.
28. Grounding lug - for turntable connection. Always use
this connection when using turntables. (your turntable
cable should have a grounding wire)
29. Line/Phono Input switch - to allow line level
equipment to be plugged into your phono inputs giving
you a total of 8 line input options.
30. Line Inputs – are unbalanced RCA jacks for
connecting stereo audio from line level sources such as
CD players, HiFi VCRs, cassette and reel-to-reel tape
decks, DAT machines, laser discs, tuners, even
synthesizers or other mixing consoles.
NOTE:
Plug mono audio sources into both Left and
Right inputs using a "Y" cable connector.
31. Mic Input – for your 1/4” Microphone plug.
32. Cue/Send Output – to temporarily send channel PFL
signal to an external sampler or other source such as both
monitor. Your PFL cue buttons selects the source.
33. Record Outputs – are unbalanced RCA jacks used to
send the output of the program to any connected recording
device.
34. Stereo Zone Outputs – are unbalanced RCA jacks
controlled by the Booth/Zone Level control.
35. Stereo Main Outputs – are unbalanced RCA
connectors controlled by the Master fader.
36. Stereo Balanced Main Outputs – are low-impedance
XLR type connectors controlled by the Master fader.
37. Fader Start Connector – to attach your mixer to a
remote start equipped Numark CD player using industry
standard 1/8”(3.5mm) cables.
38. Equalizer Deactivation Switch – to turn off the EQ
control and avoid accidental usage.
39. IEC Power Connector – to plug in your power cord.
40. Voltage Selector – to set to your country’s standard.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Numark CM100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Numark CM100 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info