589440
2
Zoom out
Zoom in
Previous page
1/5
Next page
Note that as long as you press on center button, the display shows which parameter
is to be changed next. When the next parameter to be changed is a threshold, the
corresponding flag flashes, and ‘THR’ is displayed in alternation with the actual
threshold. When the next parameter to be changed is a duration, the corresponding
flag flashes, and ‘DUR’ is displayed in alternation with the actual duration. When the
next parameter to be changed is the wind speed unit, ‘UNT’ is displayed. If there is
nothing to change next (you have just set the unit), ‘---’ is displayed to show that the
SKYWATCH WWS will go back to normal mode.
Also note that if you do not push on any button for 60 seconds, the SKYWATCH
WWS will automatically go back to normal mode, without validating the value you
were changing. This is to prevent the SKYWATCH WWS from accidentally staying in
setup mode, although it will still measure the wind speed and trigger alarms as in
normal mode. But in setup mode, the wind speed and the LCD warnings (the flags)
will not be displayed.
Alarms durations
Alarms durations are shown in seconds. If you increase the duration to more than 59
seconds, ‘INF’ will be displayed instead of a number. This means that the alarm will
remain active (buzzer + LEDs) until the wind drops below the threshold for 60
seconds.
Setting back the default values
If you want to set back the default values, push left and right buttons for more than
four seconds, until the display goes black, then release both buttons. This will set
back unit to mph, thresholds to 40, 50 and 60 mph for the low, medium and high
alarms respectively, and the durations to 15, 30 and 60 seconds for the low, medium
and high alarms respectively.
Test progamm
Push then center button for 3 seconds. The display shows ‘TST‘ and after 3 seconds,
each alarm level will turn on with lights and buzzer during 10 seconds
Limited warranty :
This limited warranty shall be in effect for one year after the date of purchase by the original consumer
purchaser. During this limited warranty period, JDC ELECTRONIC SA will repair or replace without
charges any defective product with a comparable product. This limited warranty will not apply to any
instrument that has been misused, improperly installed, repaired, altered or which has been the
subject of any negligence or accident.
JDC ELECTRONIC SA
Uttins 40, CH-1400 YVERDON, SWITZERLAND
Phone ++41 (24) 445 2121 Fax ++41 (24) 445 2123
info@jdc.ch www.jdc.ch
…SWISS PRECISION INSTRUMENTS
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NTech SKYWATCH WWS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NTech SKYWATCH WWS in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info