132754
12
Zoom out
Zoom in
Previous page
1/14
Next page
12
4. RACCORDEMENT ELECTRIQUE
Raccordement électrique sur le cordon avec fiche bipolaire + terre. Connectez la
fiche toujours à une prise avec terre. L'intensité du courant figure sur la plaque
signalétique. Utilisez une prise avec terre.
La prise doit être montée visiblement et bien accessible.
Le remplacement doit se faire par un installateur qualifié.
5. FONCTIONNEMENT
La hotte est dotée d'une puissante turbine de 370 m³/h pour 810 et de 850 m³/h
pour 820 qui absorbe les vapeurs à travers un filtre à graisses pour les évacuer
ensuite à l'extérieur.
Le moteur a une sortie de Ø 125 mm pour 810 en Ø 150 mm pour 820 et vous
offre la possibilité d’évacuer le tuyau vers le haut, droite, gauche, en avant ou en
arrière.
Le carter en inox brossé détermine les couloirs d'aspiration périphérique , ce qui
assure un traitement efficace de toute la surface couverte par la hotte.
ATTENTION !
L’évacuation doit se faire soigneusement (fig. 2 et 3). Veillez à ce que votre
raccordement soit hermétique : utilisez de l'adhésif alu 906.292.
L'évacuation doit être la plus courte et la plus directe possible. Assurez-vous du
libre débouché à l'air: tout étranglement du tuyau d’évacuation, rétréci du tuyau,
chapeau de couverture, grillage est contre indiqué pour assurer un résultat
optimale de rendement et de niveau sonore.
fig. 2
Pour une sortie murale, utilisez le clapet de façade NOVY à volets mobiles type
906.178.
17
* Ventilator ein- und ausschalten: taste “1”
Drücken Sie auf Taste “1”, der Ventilator wird ausgeschaltet. Wann Taste 1
wieder eingeschaltet wird, dann startet die Haube dieselbe Geschwindigkeit und
Beleuchting wie beim Ausschalten
Ausschalten mit Beständigkeit: Nach 1 Mahl einddrucken von Taste “1” wird ein
Beständigkeit von 10 Minuten gestartet (das Erste LED blinkt und die andere
LEDs brennen je nachdem die Geschwindigkeiten activiert sind). Nach Verlauf
von 10 Minuten werden Motor und Beleuchtung ausgeschaltet.
Ausschalten ohne Beständigkeit: Taste “1” zwei mal einddrucken, Motor und
Beleuchtung werden gleich ausgeschaltet.
* Der erwünschte Stand einstellen: Tasten “2” und “5”
Drücken Sie auf die Taste “2”, der Ventilator wird in niedrigen Stand eingeschaltet.
Drücken Sie auf die Taste “5“, der Ventilator wird in höheren Stand eingeschaltet.
Diese Haube hat 3 Geschwindigkeiten und eine intensive Geschwindigkeit
“Power“.
Auf diesem Stand wird die Maximum Geschwindigkeit erreicht. Drücken Sie auf
die Taste “5“ bis die rote LED (4) brennt.
* Beleuchtung: Taste “6”
Drücken Sie auf die Taste “6“ um die Beleuchtung ein- und auszuschalten. Die
Beleuchtung kann immer gebraucht werden, auch wenn der Ventilator nicht in
Wirkung ist.
Wenn die Beleuchtung eingeschaltet ist können Sie die Lichtstärke ändern
durch die Taste eingedruckt zu halten.
* Geschwindigkeiten: “3” und “4”
Auf diese LEDs sehen Sie welche Geschwindigkeit aktiv ist.
Ein selbherstellend Thermocontact sorgt dafür dass der Motor ausgeschaltet wird
wann er überhitzt. Nach Abkühlung wird der Motor zurück eingeschaltet.
3. MONTAGE
(Siehe eingeschlossenes Montageblatt)
Achtung!
Für die Demontage der Haube reicht es die Schrauben auf zu drehen.
Bitte beobachten Sie dass vor der Demontierung die Kochplatte mit einem Karton
oder einer Decke abgedeckt wird.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Novy 820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Novy 820 in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info