493110
10
Zoom out
Zoom in
Previous page
1/12
Next page
-17-
Cable TV offers you a wide choice of
programmes. Most of them are free, others
are to be paid fo'r ,by the viewer. This means
that you will need to subscribe to the broad-
casting organisation whose programmes you
wish to receive. This organisation will supply
you a corresponding decoder unit to allow the
programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
-18-
programme will be displayed on the screen.
Teletext page number will be displayed on
the upper left comer of the screen when the
selected page is found.
Press the
@ button to display the selected
Teletext page.
To Exit Teletext
Press the ® button. The screen will switch
to TV mode.
To Display The Time
While watching a TV programme with Tele-
text transmission press the @ button. The
current time information, captured from Tele-
text will be displayed on the screen.
If the programme being watched does not
have Teletext transmission, no information
will be displayed.
:Fastext
Your TV supports the 1000 page Teletext sys-
tem. When the page number of any of the 1000
pages in memory is entered, the system will
not search for the requested page; instead it
will display the page automatically. If the re-
quested page is not in memory, the system
will search for the requested page number
and save the 1000 pages including the re-
quested page into memory after finding it.
Press the .••.button to move the Teletext
screen forWard one page at a time.
Press the .••.button to move the Teletext
screen backward one page at
a time.
For Fastext
The subject-heading for the information may
have a particular colour.
• Press an appropriate RED, GREEN, YELLOW
or BLUE button in order to reach the relevant
page quickly.
For TOP text
TOP text mode of operation will be activated
automatically according to the transmission.
If TOP text transmission is present, colour
coded buttons will appear in status row.
If TOP text transmission is not present, sta-
tus row will not appear.
The subject-heading for information may be
located in coloured box.
In Top mode the .••.or .••.commands will re-
quest the next or previous page respectively.
If TOP text transmission is not available, in
case of operation of these commands, wrap-
around occurs. For example page 100 ap-
pears to be one greater than page 199.
Connect Peripheral
Equipment
There is awide range of audio and video equip-
ment that can be connected to your TV.
The following connection diagrams show you
where the different (Optional) equipment should
be connected at the rear side of the TV.
High Definition
Your LCD Television is capable of displaying
High Definition pictures from devices such as
a High Definition Satellite Receiver or DVD
Player. These devices must be connected via
the HDMI socket (EXT-5) or Component Socket
, (EXT-3). These sockets can accept either nop
or 1080i signals.
Via The Scart
LCD TV has 2 Scart sockets. If you want to
connect peripherals (e.g. video, decoder, etc.)
which have Scart sockets to the TV, use SCART
1 or SCART 2.
If an external device is connected via the Scart
sockets, the TV will be switched to AV mode
automatically.
Do not connect Digital Set Top Box devices
via Scart 1. Use Scart 2.
Via Aerial Input
Ifyou want to connect to your TV, peripherals like
video recorders or decoders, but the device you
want to connect does not have a Scart socket,
you should connect itto the Aerial input ofthe TV.
If the VCRis connected via Aerial input it ~s
suggested to use Programme o.
Decoder
Connect a decoder with an aerial socket
to the TV
Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
Connect the decoder to the TV with a Scart
cable to SCART 1.
TV And Video Recorder
Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to SCART sockets.
Playback NTSC
To use this option you can;
Connect an NT~C VCR player to a Scart
socket at the rear side of the TV.
Connect an NTSC VCR player to RCA Jacks
at the side of the TV.
Then, press
@) button to select appropriate
source.
Copy Facility
Source selection for VCR recording.
Select Feature menu.
Select Ext-2 Out by pressing ~ I ~button.
Select a source to'copy the picture from that
source,
Search For And Store The Test
Signal Of The Video Recorder
Unplug the aerial cable from the aerial socket
of your video recorder.
Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
Enter the Install menu and select search.
Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number
O.
Replace the aerial cable in the aerial socket
of your video recorder once you have stored
the test signal.
10


Need help? Post your question in this forum.

Forumrules
1

Forum

nordmende-nm32720

Reset search

  • how to arrange channel listings,know how to move them but keep them there? Submitted on 10-10-2021 at 15:30

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nordmende NM32720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nordmende NM32720 in the language / languages: English as an attachment in your email.

The manual is 9,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info