Manual Nobo X20M (page 26 of 28) (English)

493102

Zoom out

Zoom in

1/28

APPENDICES

CHANGING THE LAMP

The projector will detect the lamp life itself. It will show you a warning

message “Lamp is running out of standard time. Be sure to replace the

lamp as soon as possible.” Make sure that the projector has cooled

down for at least 30 minutes before changing the lamp.

Lamp compartment is

hot! Allow it to cool

down before changing

the lamp!!

WARNING

To reduce the risk of

personal injury, do not

drop the lamp module

or touch the lamp bulb.

The bulb may shatter

and cause injury if

dropped.

WARNING

■ Lamp Changing Procedure

1 Turn off the power to the projector by pressing

the “Power / Standby” button.

2 Allow the projector to cool down for at least 30

minutes.

3 Turn off the main power switch.

4 Disconnect the power cord.

5 Use screwdriver to remove the screw from the

cover.

6 Remove the cover.

7 Remove the three screws from the lamp module.

8 Pull out the lamp module.

To replace the lamp module, reverse these steps.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nobo X20M in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nobo X20M Manual

Product: