586824
48
Zoom out
Zoom in
Previous page
1/89
Next page
46 Originlal Instructions
6.3 Supreme LCD Display
The Supreme LCD model has a display giving information
about the machine, Fig. 21.
Speed level
When the start button is pushed or the hose is
connected to the wall socket, the display will turn on
and show the speed level.
Dust bag/bag lter indicator
When the dust bag/ lter symbol starts to ash dur-
ing operation, the cleaner tells you that it is almost time
to clean the bag lter and replace the dust bag. When it
is time to do so, symbol will be lit continuously. The dust
bag/ ler symbol will be lightened after every 20 operation
hours of the cleaner at the latest. If the symbol is lit, do
like this: Turn o the cleaner by the hose handle (remote
versions) or remove the suction hose from the wall inlet
(manual hose versions) or by pushing the on/o switch
on the display. Then check if the bag lter/dust bag is
clogged. Replacement is described in chapters 7.1, 7.2,
7.3 and 7.4.
In switched o mode, re-set run time counter by holding
the start/stop button down until the dust bag indicator
goes out (after approx. 5 sec.).
Reduced air ow indicator - lit
The reduced air ow symbol on the display indi-
cates that the air ow through the vacuum cleaner
is reduced. After 30 seconds of operation with
reduced air ow, the vacuum motor will be shot down in or-
der to prevent damage to the motor. If the reduced air ow
symbol is lit and the motor has been shut down, do like
this: Check the bag lter and dust bag (see chapters 7.1,
7.2, 7.3 and 7.4) to see if anything is blocking the air ow.
Remove the material causing the reduced air ow symbol
to indicate.
Service indicator
When the service symbol starts ashing, the mo-
tor will run for one more hour before it stops/will
not start. The purpose of the service symbol is to inform
you that it is time to order service of the cleaner. When
the symbol is continuously lit, the run time counter in the
cleaner has counted that the allowed amount of run time
has passed. You must now contact an authorised service
workshop and let them perform a service of the cleaner
and to reset the run time counter.
Overheat indicator - ashing
The overheat symbol indicates that the cleaner has
become overheated. The cleaner stops automati-
cally. Unplug the main power cord to reset the vacuum
cleaner and wait 5-10 minutes to allow the machine to
cool down. While you are waiting, check the hose, dust
bag and lter to be sure that nothing is blocking the ow
of air through the machine.
Signal indicator - ashing
When the symbol is ashing, the hose handle is out
of range and there is no connection to the cleaner.
The cleaner will automatically stop after 30 min. if
the hose handle or the cleaner has not been activated.
Fig. 21
Speed
Service
Dustbag/Filter
Wireless
Airflow
Temperature
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk Supreme LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Supreme LCD in the language / languages: Danish, Swedish, Finnish as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Supreme LCD

Nilfisk Supreme LCD User Manual - English - 26 pages

Nilfisk Supreme LCD User Manual - German - 27 pages

Nilfisk Supreme LCD User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info