586824
7
Zoom out
Zoom in
Previous page
1/26
Next page
39
3.1 Starting the machine
The control current outlet (low voltage) should be connected
to a control current lead running the length of the pipes.
Both ends of the low-voltage lead should be connected to
the connection panel on the vacuum cleaner. One lead to
each outlet.
The central vacuum cleaner’s power cable must be con-
nected to a 230 volt mains socket. The appliance is double-
insulated and does not need to be earthed.
Start/stop button
All models have a start/stop button on the front to start and
stop the power unit, Fig. 8. The start/stop button can also be
used when/if you want to use a Nil sk utility inlet to vacuum
direct from the machine (if you do not have a Nil sk hose
with remote control) or for testing and demos.
Manual hose
The vacuum cleaner starts and stops automatically. When
the vacuum hose is connected to a vacuum socket, a metal
ring on the end of the hose closes the control circuit and the
vacuum cleaner starts up. Fig. 7. When the hose is removed
from the vacuum socket, the vacuum cleaner stops.
Wireless handle
If you use a hose with a wireless handle, you can start and
stop the vacuum cleaner using the switch on the handle, Fig.
9. Wireless handles also have the feature of adjusting the
suction power of the cleaner, using the buttons at the hose
handle.
3.2 Servicing
Always unplug the power cord before doing
any service work!
If suction is poor, it indicates that the ow of air through the
machine is restricted. This may be due to the following:
The dust bag is full and should be replaced.
• The lter is clogged and should be cleaned.
The vacuum cleaner has a thermal cut-out that trips if the
vacuum cleaner becomes overheated. If this happens - un-
plug the main power cord to reset the vacuum cleaner. Wait
5-10 minutes to allow the machine to cool down. While you
are waiting, check the hose, dust bag and lter to be sure
that nothing is blocking the ow of air through the machine.
The vacuum cleaner should now start again. If the cut-out
trips again, you need to get a service rm to remedy the fault.
The model Supreme 100 should only be operated with
a dust bag and lter installed.
3 Operating instructions Supreme 100
Fig. 10
Filter
Fig. 7
1
2
Manual hose
Fig. 9
Wireless Deluxe
Fig. 8
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk Supreme LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Supreme LCD in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Supreme LCD

Nilfisk Supreme LCD User Manual - German - 27 pages

Nilfisk Supreme LCD User Manual - Danish - 89 pages

Nilfisk Supreme LCD User Manual - French - 25 pages

Nilfisk Supreme LCD User Manual - Swedish, Finnish - 89 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info