586810

Nilfisk Power Eco Manual

7
Zoom out
Zoom in
Previous page
1/148
Next page
7
Power
DE
FR
ES
PT
I
T
NL
SV
NO
DA
FI
EN
K
O
Z
H
Change of dust bag and fi lters
The size and quality of the dust bag
and filters affect the efficiency of the
vacuum cleaner. Use of non-original
dust bags or non-original filters can
cause restricted air flow which may
lead to machine overload. Use of
accessories other than Nilfisk original
dust bags and Nilfisk original filters
will void the guarantee.
Changing the dust bag
The fill level idicator of
dust bag. When indicator
is completly red the dust
bag must be changed in
order to prevent motor
damage.
Always use original dust bags from
Nilfisk.
1. Release the hose connection from
the suction inlet by pressing the
locking mechanism and then
remove it.
2. Open the lid to the dust container
by lifting the opening button in front
of/under the suction inlet.
3. Grip the handle of the dust bag
holder and remove the holder and
the full dust bag from the dust
container.
4. Seal the dust bag by pulling the
cardboard flap.
5. Remove the full dust bag from the
dust bag holder.
6. Insert the new dust bag by guiding
the cardboard into the slots of the
B
Changing the prefi lter
The prefilter protects the motor by
absorbing micro-particles that are not
captured by the dust bag. Change the
prefilter with every fourth dust bag.
The prefilter is located behind the dust
bag. Always use original filters from
Nilfisk.
1. Release the hose connection
from the suction inlet by pressing
the locking mechanism and then
remove it.
2. Open the lid to the dust container
by lifting the opening button in
front of/under the suction inlet.
3. Grip the handle of the dust bag
holder and remove the holder
and the full dust bag from the
dust container.
4. Seal the dust bag by pulling the
cardboard flap.
5. Take out the filter holder with
prefilter.
6. Open the filter holder.
7. Remowe the used prefilter.
8. Fit the new prefilter and close the
filter holder. Check that the
prefilter is correctly fitted in the
holder.
9. Place the filter holder in position
and press into place.
10. Insert the dust bag holder with
new dust bag into the dust bag
conainer. Check that the dust
bag is fully opened in the dust
container.
11. Close the lid of the dust container.
12. Insert the hose connection into
the suction inlet and press until
the hose engages with a click.
C
bag holder.
7. Insert the dust bag holder with
new dust bag into the dust bag
conainer. Check that the dust
bag is fully opened in the dust
container.
8. Close the lid of the dust container.
9. Insert the hose connection into the
suction inlet and press until the
hose engages with a click.
Push the button in the middle
of the tube to release the length
adjustment lock. Adjust the tube to
desired length.
Disconnect hose, tube and nozzle
• Disengage the nozzle from the
tube by pressing the button.
• Disengage the hose from the
tube by pressing the button.
• Release the hose connection
from the suction inlet by pressing
the locking mechanism and
remove.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk Power Eco at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Power Eco in the language / languages: All languages as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info