Manual Nilfisk gs 90 s (page 16 of 48) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

316939

Zoom out

Zoom in

1/48

5 Hose and tubes

1 Fitting hose to the curved tube

Slide the hose into the curved tube and adjust by turning

until locking levers grip into position.

2 Removing hose from curved tube

You may wish to remove the hose from the curved tube so

that you can easily remove a blockage.

Push one of the locking levers with a scnewdriver, as

illustrated. Tip the locking lever until it is released.

Repeat on the other locking lever. The curved tube can now

be separated from the hose.

Models with telescopic tube

The telescopic tube can be adjusted to suit your height.

3 Unlock the tube as illustrated in the diagram and pull to the

desired lenght.

4 Lock the tube as illustrated.

All models

5 Slide the curved tube into the steel tube.

6 Suction power regulation

1The suction power of the nozzle can be regulated by the slide

valve on the curved tube. Suction is most powerful when the

valve is pushed forward to close the inlet.

2 For cleaning of e.g. Ioose covers and curtains, the suction

power can be reduced by sliding the valve backwards.

7 Shaking the filter

To keep suction power at a constant level the filter must be

kept as clean as possible by shaking it at regular intervals.

The filter must not be washed or brushed.

Removing the motor 80

1 Hold the motor handle and open the top catches.

Lift off the motor.

2 Pull out the filter by its bottom plate and shake it gently from

side to side. The hose must remain fixed to the container

during the shaking operation.

The filter can be cleaned by vacuum it.

Removing the motor 90

1 Dismantle the motor by turning its handle anticlockwise. Lift

off the motor.

Emptying the container

When the filter has been shaken and the hose detached,

release the two latches and open the container. Lift off the top

part and empty the lower part of the container.

Replacing the motor 80

When mounting the motor make sure that the switch is directly

over the suction inlet of the container and the plug is turned

backwards.

Replacing the motor 90

2 Reset the motor so that the on/off switch is opposite the

motor mounting mark on the container and the plug is turned

backwards. Turn the motor clockwise until a distinct click

is heard. If the motor will not lock into position by turning,

then press the red locking lever inside the container in the

direction of the arrow.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk gs 90 s in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk gs 90 s Manual

Product: