316932
14
Zoom out
Zoom in
Previous page
1/32
Next page
Instruction No. 82226401/00-08
22226000. Replacement of the buttons for dust cover (1), cable reel (3) and on/off (4)
A-0.6.5
22226300. Replacement of the buttons for two speed regulation (6) and on/off (8)
14
218580xx. Replacement of the top housing (12)
223535xx. Replacement of the top housing King
22352900. Replacement of the On/Off button (4)
22352901. Replacement of the On/Off button two speed (8) with activator (7)
22353100. Replacement of the activator for cord reel
22353200. Replacement of the activator for On/Off
22353900. Replacement of the buttons for dust lid (1), cable reel (3) with pivots (2)
ASSEMBLY INSTRUCTIONS GM 200 / 300 / 400 & KING 500 SERIES
Tool to be used for: Tool type
Two speed regulation button (6) Sloth screwdriver 3,5mm
Side pivot (2) Pair of pliers (5)
$ Removal of the two speed
regulation button (6) and/or
the on/off button (8) for two
speed regulation models,
and/or the activators.
Press a screwdriver into the inside
bush (7) of the two speed regula-
tion button, turn it clock-wise 90
degree and pull it away. Remove
the button (6) with the spiral spring.
Removal of the on/off button (8):
Remove the two-speed regulation
button (6) as described.
Press the two snaps on the
button (8) to release it from the
top housing and lift it away after
turning it 30 degrees.
Removal of the on/off activator:
Snap off, break, activator for on/off
button (23, 24, 25, 26).
Replace with new parts.
Replacement of the top housing
Remove dustcover buttom, cabel
reel button and on/off button.
Remove cabel terminal and screw,
retainer, ratches and handle acces-
sory lid, see instruction 82362400.
Remove activator for cord reel (20,
21, 22). Remount buttons, cabel
terminal, retainer, accessory lid and
activator for cord reel, etc. on new
upper part.
Reassembly machine
Press the buffer in place by hand
after mounting the strap (12)
around the housings.
Replace in reverse order.
All models: Test after repair
After repair, please check that the
vacuum cleaner is functioning to
Nilfisk specifications and any local
authorised precautions.
3
1
6
20
21
22
8
2
7
R
24
23
26
25
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk gm 430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk gm 430 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info