Manual Nilfisk family (page 25 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

315566

Zoom out

Zoom in

1/52

Fault finding

• the motor will not start

– a fuse may have blown and needs replacing.

– the cable may be defective and needs checking.

• the suction power is reduced

– the dust bag may be full and needs replacing.

See point 3.

– the dust filters may be clogged and need replacing.

See point 3-4-7.

– the hose, tube or nozzle may be blocked and needs to be

cleared.

• the vacuum cleaner stops

– the thermal cut-out has switched off the motor as a result of an

obstruction of the hose, tube or nozzle.

Remove the cause of the obstruction.

Maintenance

Always keep the cleaner in a dry place. The cleaner is designed for

continuous heavy work. Depending on the number of running hours

- the dust filters should be renewed.

Keep the container clean with a dry cloth, and a small amount of

spray polish.

For details of after sales service contact Nilfisk-Advance directly.

4. Changing the HEPA filter

Replacing the HEPA exhaust filter. In models with HEPA filter

placed under the handle cover:

1. Push the button inside the handle upwards and twist the handle

counter-clockwise and remove it.

2. Remove the HEPA filter.

3. Replace with the new HEPA filter and position it as shown.

4. Locate the handle into position and lock it by turning it

clockwise until it snaps.

All models

Damage resulting from the use of filters other than original Nilfisk

filters is not covered by the guarantee.

5. Suction power regulation

1. The suction power of the nozzle can be regulated by the slide

valve on the curved tube.

Suction is most powerful when the valve is pushed forward to

close the inlet.

2. For cleaning of e.g. Ioose covers and curtains, the suction power

can be reduced by sliding the valve backwards.

Models with two speed regulation

Suction is variable by changing the speed. See point 1.

6. Parking of the tube with nozzle

During and after cleaning you can park the hose with tube and

nozzle.

1. Press the parking clip on the nozzle inside the groove on the

back-side of the container

7. Main filter cleaning

The main filter can be cleaned with a dust bag in place, when the

suction efficiency is falling.

1. Open the container by pushing the knob on the lock.

2. Press the plastic flap inside the groove for the lock to release the

upper container from the main filter and remove the upper

container.

3. Remove the main filter from the bottom housing.

4. Replace the upper housing on the bottom housing with a dust

bag in place.

5. Start the vacuum cleaner.

6. Clean the filter material with the vacuum cleaner

7. Replace the cleaned main filter

8. Replace the upper container on top of the main filter

9. Lock the plastic flap on the upper container on the main filter

frame.

10. Close the lock.

Thermal cut-out protection

The vacuum cleaner is equipped with a thermal cut-out to protect

the motor and other vital machine parts from overheating. Should

the machine cut out, you will have to wait at least 5-10 minutes for

it to automatically reset. While you are waiting, switch the machine

off and unplug it, then check the hose, dust bag and filters to be sure

that nothing is blocking the flow of air through the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk family in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk family Manual

Product: