505723
5
Zoom out
Zoom in
Previous page
1/17
Next page
5Original Instructions
It is recommended that the electrical supply to the machine should include a residual current
device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms.
Inadequate extension cables can be dangerous. If an extension cable is used, it shall be
suitable for outdoor use, and the connection has to be kept dry and off the ground
• Nilfi sk recommends use of an extension cable drum when cable extension is needed which
keeps the socket at least 60 mm above the ground.
Cables on extension cable drums should always be completely unwound to prevent overhe-
ating. Extension cables must comply with the below-mentioned requirements for length and
cable dimensions:
1.0 mm² Max. 12.5 m
1.5 mm² Max. 20.0 m
2.5 mm² Max. 30.0 m
If the electric cable is damaged, it must be replaced by an authorized Nilfi sk distributor or
similar qualifi ed person in order to avoid a hazard.
Water connection
High pressure washer not suitable for connection to the potable water mains.
Connection of the machine to the drinking water mains according to national regulations.
According to EN 60335-2-79 this machine is only allowed to be connected with the drinking
water mains when an appropriate backfl ow preventer has been installed. Type BA according
to EN 60335-2-79. The backfl ow preventer can be ordered under number 106411177.
As soon as drinking water has fl own through the backfl ow preventer, it is no longer regar-
ded as drinking water.
Operation by suction (e.g. a rainwater vessel) is carried out without a backfl ow preventer –
see “Connecting to a pressureless water supply”. The machine can be connected to wa-
ter mains with a max. inlet pressure of 1 MPa/10 bars and max. 40°C.
An ordinary ½" garden hose of min. 10 m and max. 25 m will be suitable for normal operati-
on at 3 bar inlet pressure.
IMPORTANT !
Only use water without any impurities.
If there is a risk of running sands in the inlet water (i.e. from your own well), an additional
lter should be mounted.
During work
WARNING!
Never use the machine in an environment where there could be a danger of explosions. If
any doubt arises contact the local authorities.
It is not allowed to clean asbestos-containing surfaces with high pressure.
Never draw in fl uids containing solvents (e.g., gasoline, heating oil, paint thinner or acetone)
These substances damage the materials used in the machine. Their spray is highly combu-
stible, explosive and poisonous.
Never direct the water jet at yourself, other persons, not even to clean clothing or footwear
- risk of injury.
Never direct the water jet at pets or other animals.
Never direct the water jet at live electrical equipment or the machine itself - danger of
short-circuiting.
Hold the spray lance fi rmly with both hands. The spray lance is affected by a thrust of up to
16.4 N during operation.
This high pressure washer machine must not be operated at temperatures below 0°C.
Never start up a frozen machine. Frost damages are not covered by the guarantee!
Always ensure fi rm and safe footing
Keep the machine as far away as possible from the object being cleaned.
Always adjust the distance and thus the pressure of the nozzle to the surface, which is to be
cleaned to avoid any damage to the surface being cleaned.
The machine shall be operated in an upright position.
Do not cover the machine or use it in a room without adequate ventilation.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk C 100.6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk C 100.6 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk C 100.6

Nilfisk C 100.6 User Manual - German - 17 pages

Nilfisk C 100.6 User Manual - Dutch - 17 pages

Nilfisk C 100.6 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info