Manual Nilfisk-ALTO SCRUBTEC R 466 (page 67 of 124) (English, German, Dutch, French)

609460

Zoom out

Zoom in

1/124

USER MANUAL

ENGLISH

9098960000(1)2011-04 A SCRUBTEC R 466 - R 471 - R 471C - BOOST

R4 5

WARNING!

Do not use the machine in particularly dusty areas. –

Use the machine only where a proper lighting is provided. –

If the machine is to be used where there are other people besides the operator, it is necessary to install the –

pivoting light (optional).

While using this machine, take care not to cause damage to people or objects. –

Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects. –

Do not put any can containing ﬂ uids on the machine. –

The machine working temperature must be between 0 °C and +40 °C. –

The machine storage temperature must be between 0 °C and +40 °C. –

The humidity must be between 30% and 95%. –

When using ﬂ oor cleaning detergents, follow the instructions on the labels of the detergent bottles. –

To handle ﬂ oor cleaning detergents, wear suitable gloves and protections. –

Do not use the machine as a means of transport. –

Do not allow the brushes to operate while the machine is stationary to avoid damaging the ﬂ oor. –

In case of ﬁ re, use a powder ﬁ re extinguisher, not a water one. –

Do not tamper with the machine safety guards and follow the ordinary maintenance instructions –

scrupulously.

Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. –

Always keep the openings free from dust, hairs and any other foreign material which could reduce the air

ﬂ ow.

Do not remove or modify the plates afﬁ xed to the machine. –

To manually move the machine, the electromagnetic brake must be disengaged. When the operation is over, –

the electromagnetic brake must be activated again. Do not use the machine when the electromagnetic brake

handwheel is screwed down.

When the machine is to be pushed for service reasons (missing or discharged batteries, etc.), the speed –

must not exceed 4 km/h.

This machine cannot be used on roads or public streets. –

Pay attention during machine transportation when temperature is below freezing point. The water in the –

recovery tank or in the hoses could freeze and seriously damage the machine.

Use brushes and pads supplied with the machine or those speciﬁ ed in the User Manual. Using other brushes –

or pads could reduce safety.

In case of machine malfunctions, ensure that these are not due to lack of maintenance. Otherwise, request –

assistance from the authorised personnel or from an authorised Service Center.

If parts must be replaced, require ORIGINAL spare parts from an Authorised Dealer or Retailer. –

To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of –

this Manual, must be performed by the authorised personnel or by an authorised Service Center.

Do not wash the machine with direct or pressurised water jets, or with corrosive substances. –

When WET batteries are installed on the machine, do not tilt the machine for more than 30° from the –

horizontal plane to prevent the highly corrosive acid from leaking out of the batteries. If the machine must be

tilted to perform any maintenance procedure, remove the batteries.

The machine must be disposed of properly, because of the presence of toxic-harmful materials (batteries, –

etc.), which are subject to standards that require disposal in special centres (see Scrapping chapter).

9098960000(1)2011-04 A.indb 59098960000(1)2011-04 A.indb 5 07/04/2011 15:59:1307/04/2011 15:59:13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SCRUBTEC R 466 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk-ALTO SCRUBTEC R 466 Manual

Product: