609424

Nilfisk-ALTO SCRUBTEC 343.2 Manual

74
Zoom out
Zoom in
Previous page
1/100
Next page
ENGLISH USER MANUAL
24 SCRUBTEC 343.2 - 9099636000
TROUBLESHOOTING
Trouble Possible Cause Remedy
The motors do not turn on; no LED
turns on.
The battery connector is disconnected. Connect.
The batteries are discharged. Charge.
The F0 fuse is blown. Replace.
The F3 fuse is blown. Replace.
The warning lights (65) ash
simultaneously.
The brush motor is overloaded. Use a different kind of brush.
There are foreign materials (tangled threads, etc.)
preventing the brush from rotating
Clean the brush hub.
The brush motor does not run.
The push-buttons (61) are broken. Replace. (*)
The fuse F1 is blown. Replace.
The switch (62) is broken. Replace. (*)
The brush disengagement system
does not work.
The F4 fuse is blown. Replace.
The vacuum system motor does not
turn on.
The F2 fuse is blown. Replace.
The switch (63) is broken. Replace. (*)
The dirty water vacuuming is
insufcient.
The recovery tank is full. Empty.
The vacuum grid is clogged or the oat is closing. Clean the grid and check the oat.
The vacuum hose is disconnected from the
squeegee or faulty.
Connect.
The squeegee is dirty, or the squeegee blades are
worn or damaged.
Clean the squeegee or replace the blades.
The recovery tank cover is not properly closed, or
the gasket is damaged.
Check and/or clean the seating surface or replace
the gasket.
The vacuum system motor lter is dirty. Clean.
The solution ow is insufcient
The solution lter is dirty. Clean.
The solution solenoid valve is faulty. Replace. (*)
The squeegee leaves marks on the
oor
There is debris under the squeegee blades. Remove the debris.
The squeegee blades are worn, chipped or torn. Replace the blades.
(*) This maintenance procedure must be performed by Nilsk authorised Service Center.
For further information refer to the Service Manual, available at any Nilsk Service Center.
SCRAPPING
Have the machine scrapped by a qualied scrapper.
Before scrapping the machine, remove and separate the following materials, which must be disposed of properly according to the
Law in force:
– Batteries
– Brushes
– Plastic hoses and components
– Electrical and electronic components (*)
(*) Refer to the nearest Nilsk Center especially when scrapping electrical and electronic components.
… 74 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO SCRUBTEC 343.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SCRUBTEC 343.2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info