608944
4
Zoom out
Zoom in
Previous page
1/30
Next page
ATTIX 995-0H/M SD XC Type 22
3
1)
OEL = Occupational Exposure Limit
Original Instructions
Dust Class M (medium). The dusts which belong to this class
are: dusts with OEL values
1)
> 0.1 mg/m³ as well as saw dust.
The machine is tested in its entirety by vacuums for this dust
class. The maximum degree of permeability is 0.1% and the dis-
posal must be low dust.
Dust Class H (high). The dusts which belong to this class are:
dusts with OEL values
1)
, all carcinogenic dusts and dusts
which are mixed with pathogenic agents. Vacuums for Dust
Class H are tested in their entirety and have a maximum degree of
permeability of 0.005%. The disposal must be dust free.
Machines to be used in Zone 22 are marked as Type 22 vacu-
ums.
These machines may be used for picking up dust from
dust class L, M or H.
Zone 22 is defined as environments where flammable dusts are
present for short periods only (e.g. less than 10 hours per year).
Type 22 machines are suitable for use as dust extractors.
The air flow in safety vacuum systems has to be strictly controlled
to achieve a minimum flow rate of V
min
= 20 m/s in the suction hose.
The vacuum cleaner ATTIX 995-0H/M SD XC Type 22 is suitable for
picking up:
Non flammable liquids (flashpoint 55 °C or higher).
Sawdust and dusts hazardous to health, including dusts with
OEL values, carcinogenic dusts and dusts containing germs
and pathogens.
Flammable, dry dust in Zone 22.
Use the cleaner only if it is certain that no active sources of ignition
can be sucked in.
Conductive extraction equipment, e.g. extraction hoods on machines
and conductive parts of machining equipment (e.g. equipment in
protective class II) that are not earthed through the cleaner, must be
earthed in some other way to prevent electrostatic charges.
When picking up flammable dust in Zone 22, the dirt tank must be
emptied as required, but always after use.
It must be assured that dust not accumulate on the appliance by
regular cleaning.
The vacuum cleaner must be used only, if all filters, as well as the
filter for the motor cooling air, are attached and without damage.
The cleaner is not suitable for extraction on machining equipment in
operation that could produce sources of ignition.
When dust removers are used, the rate at which air is exchanged
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO ATTIX 995-0H-M SD XC Type 22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO ATTIX 995-0H-M SD XC Type 22 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO ATTIX 995-0H-M SD XC Type 22

Nilfisk-ALTO ATTIX 995-0H-M SD XC Type 22 User Manual - German - 31 pages

Nilfisk-ALTO ATTIX 995-0H-M SD XC Type 22 User Manual - Dutch - 30 pages

Nilfisk-ALTO ATTIX 995-0H-M SD XC Type 22 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info