776299
97
Zoom out
Zoom in
Previous page
1/99
Next page
SECTION VI THEORY OF OPERATION
Utrecht
- 96 - Ref 001
5. CONNECTING AND DISCONNECTING MODEMS
When the modems are connected and suitably set at the instrument and the PC, just click
the “Make modem connection” button in Power Link toolbar or select “Make modem
connection” in Modem menu. It takes a few seconds (up to 30 s) to establish
communication link. The instrument operates as it is connected directly to the PC via
RS232 interface. It means that all interface functions are active, e.g.: receive / transmit
instrument settings, data download, manipulating of the recording function, clear memory.
To disconnect just click on “Hang-up modem connection“ button on Power Link toolbar
or select “Hang-up modem connection” in Modem menu.
6. SMS MESSAGES
The instrument has possibility to send an SMS message to the mobile phone when GSM
modem communication is enabled. Messages are intended to inform the operator about
some events regarding the instrument.
The following events can be sent as SMS messages:
- Less than 50% of recording memory is free.
- Less than 20% of recording memory is free.
- Recording memory is full.
- WAVEFORM, FAST LOGGING, TRANSIENT, EN50160 or PERIODICS recording is
finished.
For SMS messaging prepare the following configuration:
ENABLE PASSW.
GSM/SMS PARAM. => ENABLED >> DISABLE
DATE/TIME CPIN :
LANGUAGE DEST: XXXXXXXXXXXX
SYSTEM REINIT. USERID: XXXXXXXXXX
CLR.REC.MEM. SEND TEST MESSAGE
- Enter Destination phone number “DEST:” (phone number of the mobile phone that will
receive SMS messages from the instrument) using cursor keys.
- Enter user ID “USER ID”: (optional instrument identification string) using cursor keys
as described in chapter 3.4.
- Provide PIN card of modem terminal with the number of your local.
- It can be done with “SEND TEST MESSAGE” command in GSM/SMS PARAMETERS
menu of the instrument.
Press Enter to confirm settings or ESC to discard them.
Note:
- SMS message cannot be sent if modem communication is established.
If you do not want the instrument to send SMS, disable GSM/SMS PARAM. and set baud
rate to 9600
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nieaf-Smitt PQA 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nieaf-Smitt PQA 6600 in the language / languages: English as an attachment in your email.

The manual is 1.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info