641182
1
Zoom out
Zoom in
Previous page
1/2
Next page
Congratulations on the purchase of your new Niagara 9100 system.
The following steps in this Quick Start Guide will help you set up and
congure your new streaming media system, so you can begin stream-
ing or capturing video as quickly as possible. The Niagara web interface
allows quick and easy access to its operaonal features. You must modify
any advanced setup opons of the encoders through this interface before
running an encoder session.
Complete the following steps to begin operang the Niagara 9100.
AC power connector for 120-240 volts,
AC, 50-60 Hz (A on Figure 1)
Plug the power cable included with your system
into this connector and plug the opposite end
into an AC power source.
Note: Redundant systems include two power connecons.
Video and audio inputs will vary between Niagara 9100 models.
The inputs may be combinaons of the following connecons (E on
Figure 1).
Composite BNC Input
A BNC-to-RCA adapter connects a com-
posite RCA video source to the BNC
connector.
SDI Video Input
The high-denion and standard-
denion serial digital interface (SDI)
is a professional video input that may
include embedded audio. SDI uses a
COAX cable with a BNC connector.
Unbalanced Audio Input
These connecons are provided on a
breakout cable. These RCA connectors
provide le and right stereo inputs.
You will nd RCA connectors (standard
consumer stereo audio connecons) on
most video players and video cameras.
Niagara 9100-IP models
The audiovisual source is connected
on RJ-45 ethernet connecons. These
connecons can be ports (D on Figure
1) or a quad IP card (E on Figure 1).
Analog Video
2. Connect Video and Audio Sources
Analog Audio
1. Connect to an electrical power source
Continued on back
Quick Start Guide
Niagara
®
9100
Contact ViewCast Technical Support at support@viewcast.com.
40-03319-02-A
© 2012 ViewCast Corporation. ViewCast
®
, Niagara
®
(and design)
TM
are registered trademarks of ViewCast Corporation
or its subsidiaries. All other trademarks are the property of their respective owners. Product specications and availability
may change without notice.
US / Canada
l
800.250.6622
|
Europe/Middle East/Africa
l
+44 1256 345610
|
Asia / Pacic
l
+852 2251 8778
Digital Video
6) The rst me you start the Niagara 9100 and log in, the system
prompts you for the date, me, and video standard. You may
accept the default date, me, and video standard or select
your own opons, then click Submit.
7) The Admin Log In window may reappear once you submit the
date, me, and video standard elds. You must enter User Name
and Password again.
8) This me when you enter your valid user name and password,
the system displays the Welcome window and menu bar.
9) To create an encoder prole, from the menu bar click
Encoders > All Encoders. This example demonstrates how to create
a Microso Windows Media encoder.
10) Click Create new encoder.
Figure 1. Niagara 9100 Back Panel
3. Connect to an IP Network
4. First Start Setup
RJ-45 Ethernet connector (D on Figure 1)
The Niagara 9100 provides two network
connecons. Use either the primary
or secondary jack (or both) to connect to your
IP network.
NOTE: Contact your network administrator for assistance
if you are unfamiliar with network sengs.
The network sengs default to dynamically obtain an IP address from a DHCP
server on the network. For most network environments, you do not need to
modify these default sengs. If the system does not nd a DHCP server or it
remains unavailable on the network, it assigns its own IP address.
Once connected to a network, you should be able to access the built-in web
server by browsing to the unique machine name (the serial number located on
the boom of the appliance). You may also set the IP address through the web
interface.
If you do not have a DHCP network or you cannot connect to the appliance
through its DNS name, then you can connect a monitor to the VGA port (C on
Figure 1), and a mouse and keyboard directly to the USB ports (B on Figure 1).
The appliance has a Microso Windows 7 desktop.
The rst me you power on the appliance, the system takes a few moments to
boot up.
1) Check to ensure that you connect all devices (power cords, video and
audio sources, etc.) to the Niagara 9100.
2) Remove the front panel from the Niagara 9100: Press in the release buon
(J on Figure 2) and gently pull the panel toward you.
3) Press Power (P on Figure 2) to start the Niagara 9100.
4) From a separate computer on the same network as the Niagara
system, launch a web browser such as Internet Explorer and
enter the serial number or IP address of your system in the
address bar. The serial number is located on the boom
or the side of the system in the format fexxxxxxxx.
5) Click in the User Name eld and enter admin as the user name.
Then click in the Password eld and enter admin as the
password. Finally, click Log In or press Enter.
Left
Right
IP Input
* Redundant systems include
two power connecons.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niagara 9100 Series V7.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niagara 9100 Series V7.0 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara 9100 Series V7.0

Niagara 9100 Series V7.0 User Manual - English - 250 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info