24235
6
Zoom out
Zoom in
Previous page
1/20
Next page
The machine offers a wide selection of spin
speeds that can be selected beforehand
according to the wash programme. To change
the spin speed, simply press button ( 2 ) to
select the required speed. The corresponding
speed led will light-up each time the button
is pressed. To exclude the spin, select the
led corresponding to symbol , if present,
or the writing “no-spin”.
N.B. the maximum spin speed will vary
according to the model and is indicated
by the Leds on the machine. The
maximum spin speed that can be
selected for each programme is
SM1777
6
GB
VARIABLE SPIN:
*500
*800
*1000
23
DELAYED START:
The machine is fitted with a
delayed start function. This allows
the washing machine to be
programmed to start the wash
cycle up to 8 hours later. The delay
VOCE:
El programa se iniciará al cabo de : 1 hora 2 horas, 3 horas, 4 , 5, 6, 7 ,8, 9, 10, 11,12,13,14,
15,16 horas
*
Values may vary according to the model
Values may vary
according to the
model
START BUTTON:
Press this button to start the wash
cycle. The button (7) to indicate
VOCE: “Ha iniciado el programa” + (repetir la selección de programa, velocidad, pulsadores ) + beep beep
PROGRAMMER KNOB “STOP”:
The stop function resets the washing
machine. If, for any reason, you want to
change the wash programme or add more
washing to the load during the wash cycle,
simply place the programmer knob in
position “STOP”. Then re-position the knob
on the new programme and press the
START button.
VOCE:
Ha efectuado un reset + beep-beep ( sonido)
in hours can be selected as
follows: press the button (1)to set
a delay of 1, 2, 4, 8, hours. Press
START (7). the button (1)
signalling that the function has
been activated. The machine will
wait for the number of hours set
to elapse and then start the wash
cycle automatically.
that the wash cycle has started
Warning!!
only use this function if
strictly necessary and then only if
the programme to reset has been
running for a few minutes. Before
opening the door after a reset, wait
2 minutes for the locking mechanism
to release.
indicated by the leds that light-up
automatically when the wash
programme is selected.
Spin load imbalance control:
This washing machine is equipped
with a special electronic control system
for correctly balancing the wash load.
Prior to each spin, the system ensures
that the washing is evenly distributed
in the drum.
If the washing is not evenly distributed,
the final spin speed is reduced, and if
the load is very unbalanced, the spin
is not effected.
VOCE: Sin centrifugado
550/600 vueltas para un secado basico
700/800/900/1000 vueltas para un secapo super
1100/1200/1300/1400 vueltas para un secado plus
*
Values may vary according to the model
A mano
Rápido
Cotidiano
En frío
Aclarado
Centrifugado
30°
90°
40°
30°
40°
60°
40°
30°
30°
40°
60°
75°
30°
35°
40°
stop
l
a
n
a
-
d
e
l
i
c
a
d
o
s
i
n
t
é
t
i
c
o
a
l
g
o
d
ó
n
STOP
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newpol XF6_1200EL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newpol XF6_1200EL in the language / languages: Italian as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info