Manual NetworX NX-595E IP Communication Module (page 34 of 36) (English)

629274

Zoom out

Zoom in

1/36

UltraSync System Status Messages

The following system status messages may appear in the UltraSync application.

Zone Number / Zone Name

In alarm – This zone has triggered a system alarm condition

Is bypassed – This zone is isolated (disabled) and will not activate an alarm

Chime is set – This zone is part of the chime group

Is not secure – This zone is not closed

Fire alarm – This zone has triggered a fire alarm

Tamper – This zone has triggered a tamper alarm

Trouble fault – This zone has an open circuit

Loss of wireless supervision – This zone is a wireless device and has lost its

communication link with the control panel

Low battery – This zone is a wireless device and needs its battery changed

Partition Number / Partition Name

Is on in the away mode – This partition is armed in the away mode

Is on in the stay mode – This partition is armed in the stay mode

Is ready – This partition is secure and ready to be armed

Is not ready – This partition is NOT ready to be armed, a zone is not secure

All partitions are on in the away mode – All partitions in this multi partition system

are armed in the away mode

All partitions are on in the stay mode – All partitions in this multi partition system

are armed in the stay mode

All partitions are ready – All partitions in this multi partition system are secure

and ready to be armed

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-595E IP Communication Module in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

NetworX NX-595E IP Communication Module Manual

Product: