629279

NetworX NX-1208E-ICON keypad Manual

3
Zoom out
Zoom in
Previous page
1/19
Next page
INTRODUCTION
This manual is furnished to help you understand your security system and become proficient in its operation.
All users of your security system should read and follow the instructions in this booklet and, if possible,
practice on the keypad control while your professional installer is on site. Failure to do so could result in the
security system not working properly. Please keep this booklet in an accessible location for the life of the
security system. If you do not understand any part of this manual you should notify your installing company.
The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by entering a 4 or 6 digit code into the
Keypad Control, which is similar to a telephone keypad. If your Security Control has been so programmed, you may
be able to turn on (ARM) your System by simply double pressing the
[AWAY], [STAY] or [NIGHT] key. The
system must always be disarmed using a 4 or 6 digit code. The LED keypad includes up to 18 lights and a built-in
electronic sounder. These provide specific information relating to the status of the security system, which is
described in the booklet. Understanding what the lights and sounds mean will help you to easily operate your
system.
Keep in mind, the level of security you will obtain with this system relates specifically with two major factors:
1. The quantity, quality and placement of security devices attached to this system.
2. The knowledge you have of the security system and how that knowledge is utilized in a weekly test of the
complete system.
You should be aware of the following facts when preparing a safety/security plan for your home/business:
1. Your security system is an electronic device and is subject to failure or malfunction. Do not rely on it as
your single source of security.
2. Your system should be tested weekly.
3. Your system will not work without power.
4. Warning devices will need to be loud enough, wired correctly, and properly placed to provide notification of
an alarm event.
5. Smoke and heat detectors may not detect heat and smoke in all situations.
6. Use qualified security professionals to install and maintain your security system.
7. It may be possible to arm the security system without the backup battery connected. Your periodic test
should be done with AC Power removed to verify the battery is connected and adequately charged.
8. Care should be taken to plug in and restrain the AC transformer after testing.
Please read the following information and instructions carefully before operating your security control system.
NX-1208E-ICON User manual Page 3 16/04/05
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-1208E-ICON keypad at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-1208E-ICON keypad in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info