629277
36
Zoom out
Zoom in
Previous page
1/38
Next page
NX-10 User Manual 36
Any user can replace the wireless keypad batteries supplying power
for the backlighting. Only the master user is allowed to replace the
operating batteries.
Backlight battery replacement
The backlighting battery replacement procedure is as follows:
Remove the wireless keypad from the wall if placed there. Please
note, that depending on the configuration selected by the installer,
the user may or may not be able to remove the keypad from the
wall.
Press the backlighting battery compartment cover on the back
side of the keypad housing with your thumb and slide the cover
downwards.
Replace the two batteries with two new Duracell or Energizer "AA"
batteries. Do not use a different type of batteries. Always use batter-
ies that are from the same batch, and always replace all batteries
with fresh ones simultaneously.
Slide the battery compartment cover back into place.
Dispose the old batteries according to local regulations.
Operating battery replacement
The master user is allowed to perform the operating battery
replacement according to the following procedure:
•Disarm the system.
•Press OK and enter your master user code to open the User Menu.
Navigate with the
keys to Change Batteries and press OK.
Note, that Change Batteries option in User Menu is available only
when keypad partitions are disarmed.
Open the backlight battery compartment as described above.
Unscrew two screws inside the backlight battery compartment.
Open the operating battery compartment and replace all four
batteries. You have 5 minutes to finish this operation. You can use
Duracell or Energizer "AA" batteries only. Always use batteries that
are from the same batch, and always replace all batteries with fresh
ones simultaneously.
After replacing batteries, you have to close the battery compart-
ment in 30 seconds.
•If "Type # to finish" message is displayed, press the # key to restore
normal keypad operation.
CAUTION: Batteries can explode or cause burns when
recharged, incorrectly (dis)assembled, or exposed to fire or
high temperatures. Dispose of used battery according to
battery directive instructions and/or as required by local laws. Keep
away from children.
Battery replacement
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-10 - V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-10 - V2 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NetworX NX-10 - V2

NetworX NX-10 - V2 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info