646447

NetBotz CCTV Adapter Pod 120 Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
NetBotz CCTV Adapter Pod 120
2 NetBotz CCTV Adapter Pod 120
Installing the CCTV Adapter Pod 120
To install your pod, simply connect your video source to the appropriate DIN, BNC, or RCA
video input jack on the pod. Then, use the USB cable to connect your pod to your NetBotz
500 or 420 appliance, or to a USB hub that is connected to the NetBotz appliance. To reduce
radio frequency noise and emissions from the USB cable, clamp one clamp-on ferrite onto
the USB cable within 2-3 inches of the end that connects to the pod, and the second clamp-on
ferrite onto the USB cable within 2-3 inches of the end that connects to your NetBotz
appliance or to the USB hub.
Configuring the CCTV Adapter Pod 120
Once you have connected your CCTV Adapter Pod and video source to your NetBotz
appliance, you will need to use the Advanced View to configure the pod.
To configure your pod:
1. Start the Advanced View and then select from the Appliance drop-box the IP address of the NetBotz
appliance to which you have connected the CCTV Adapter Pod. Be sure to log into the appliance using a
user account that has administrator privileges. Once you have logged in, confirm that the newly
connected CCTV Adapter Pod appears in the Navigation Pane. The default label for CCTV Camera Pod
120s is CCTV Video Pod serial, where serial is the serial number of the pod.
2. Select the Configuration button and then double-click on the Camera Pods icon (located in the Pod/
Sensor Settings portion of the Configuration pane).
3. Select from the Camera Pod Configuration pane the entry that corresponds to the CCTV Adapter Pod and
then click Capture.
4. The Camera Capture Settings window opens. In addition to the fields that are typically available when
using this window to configure Camera Pod 120s, one additional control is available when configuring a
CCTV Adapter Pod:
– Video Format: Used to specify the format in which video is transmitted by the video source. Available
selections include: NTSC-M, NTSC-Japan, PAL-B, PAL-D, PAL-G, PAL-H, PAL-I, PAL-M, PAL-N
Combination, and SECAM.
5. Use the controls in the Camera Capture Settings window to configure the camera and image capture
settings for use with the pod. To see an example of an image capture using the currently selected Video
Format, Brightness, Contrast, and Image Quality settings click Apply and the sample image in the
Capture window will be updated using the new values. When you are finished, click OK and any changes
you have made will be saved to the appliance.
Note
The NetBotz appliance to which the CCTV Adapter Pod will be connected must
be running BotzWare 2.1 or later, and the Advanced View interface that will be
used to configure the pod must also be 2.1 or later. Before continuing, please use
the Advanced View Upgrade task to download and install the latest available
applications from NetBotz.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetBotz CCTV Adapter Pod 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetBotz CCTV Adapter Pod 120 in the language / languages: English as an attachment in your email.

The manual is 0,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info