644633
3
Zoom out
Zoom in
Previous page
1/18
Next page
3
User manual
EN
IDENTIFICATION OF MANUFACTURER AND EQUIPMENT
The identication plate shown here is applied directly onto
the appliance. It contains references and all the information
essential for the safe operation of the device.
A. Name of manufacturer.
B. CE conformity label
C. Model / serial number / manufacturing year.
D. Technical specications: voltage, current, protection rating,
mass.
Zucchetti Centro Sistemi S.P.A
Via Lungarno 305/A - 52028 Terranuova B.ni (AR)
0000
00000000000000000
00000000000000000
(C) Manufacturing year
(C) Model
(B) EC conformity label
(A) Name of manufacturer
(D) Technical specifications
(C) Serial number
DATA PLATE
REQUESTING TECHNICAL ASSISTANCE
For any technical requirements, please contact the Manufacturer’s Technical Service Centre or an authorised dealer. For technical
assistance, please indicate the data reported on the identication plate, the approximate hours of use and the type of fault
detected.
SAFETY INFORMATION
SAFETY RULES
•
During design and construction, the manufacturer carefully considered the possible hazards and personal risks that may result
from interacting with the equipment. In addition to complying with the applicable laws in force, the manufacturer adopted all
the “good manufacturing practice regulations.” The purpose of this information is to inform users on the need to use extreme
caution to avoid risks.
•
Before use, carefully read the whole manual and be sure to understand it fully, especially the safety information.
•
Only use the equipment for the purposes specically intended by the manufacturer. Improper use of the equipment may
be hazardous to personal safety and health and may lead to economic losses. Keep in mind that the operator or user is
responsible for accidents or danger to other people or their property.
•
This appliance cannot be used by people (including children) with limited physical, sensorial or mental abilities and little
experience and/or know-how, unless they are supervised by a person responsible for their safety or have received instructions
on how to use the appliance. Children should be supervised to ensure that they do not play with the appliance.
•
If the power supply of the transformer is damaged, it must be replaced by the manufacturer or by its technical service centre
or by a person with similar qualications, in order to avoid any risk.
•
Always position the power supply unit at a minimum distance of 3 metres (10 feet) from the edge of the pool, in a dry, well-
ventilated area. Position the power supply unit in an area that cannot be reached by children. For example, at a height above
160 cm (63 inches).
•
Never remove, bypass or tamper with the safety devices installed. The failure to comply with this requirement may pose
serious risks to the health and safety of people.
•
Operators who perform repairs during the working life of the robot must have the necessary technical expertise, skills and
experience in this specic eld. The failure to comply with these requirements may be hazardous to the health and safety of
people.
•
Any work to be performed on the charging station must be carried out with plug of the power cord disconnected.
•
The robot cannot be used without the top cover. If the mechanical parts of the robot are damaged, replace them.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NEMH2O Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NEMH2O Elite in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NEMH2O Elite

NEMH2O Elite User Manual - German - 18 pages

NEMH2O Elite User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info