726405
3
Zoom out
Zoom in
Previous page
1/58
Next page
English
3
WIFIDS10xx
Wi-Fi smoke and heat detector
Description (g. A)
The smoke and heat detector is a device used to detect
smoke and heat. The device does not detect gas. The
device is suitable for indoor use only. If the device
detects smoke or heat, the alarm will sound and the LED
indicator will ash red continuously until it is eliminated.
1. Test button
2. LED indicator
3. Siren
4. Smoke intake
5. Mounting plate
Safety
Read the manual carefully before use. Keep the
manual for future reference.
Only use the device for its intended purposes. Do not
use the device for other purposes than described in
the manual.
Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
The device has a limited lifetime. Replace the device
10 years after the date of purchase. Write the
purchase date on the manual for future reference.
Battery safety
Use only the batteries mentioned in the manual.
Do not use old and new batteries together.
Do not use batteries of dierent types or brands.
Do not install batteries in reverse polarity.
Do not short-circuit or disassemble the batteries.
Do not expose the batteries to water.
Do not expose the batteries to re or excessive heat.
Batteries are prone to leakage when fully discharged.
To avoid damage to the product, remove the
batteries when leaving the product unattended for
longer periods of time.
If liquid from the batteries comes into contact with
skin or clothing, immediately rinse with fresh water.
Installation (g. B)
Warning!
Do not use the device outdoors.
Do not expose the device to water or moisture.
Install the device out of the reach of children.
Install at least one device at each oor level.
Preferably install one device in each recommended
area.
Do not install the device in bathrooms, toilets or
other rooms where the device can be triggered by
steam or condensation. Install the device at least 3
meters away from these rooms.
Do not install the device in rooms where normal
combustion occurs regularly.
Do not install the device in rooms with temperatures
below 5 °C or above 37 °C.
Do not install the device in dusty or dirty
environments.
Do not install the device near doors and windows.
Do not install the device near radiators or air vents in
walls or ceilings.
Do not install the device behind curtains or furniture.
Do not use rechargeable batteries in order to prevent
malfunctions.
Do not paint the device.
1. Download, install and launch the app “Nedis
SmartLife” from the Apple App Store or Google Play
Store on your mobile device.
2. Create a new account or log in to your existing
account.
3. Tap “+” to add the device.
4. Select the correct product from the list.
5. Place the batteries (2x AA, alkaline) into the battery
compartment.
6. Press the test button 3 times in 2 seconds.
7. When the LED is turned on, conrm in the app.
8. Conrm the Wi-Fi network and password.
9. Enter the device name.
10. Mount the device to the mounting plate. Refer to the
illustrations for the correct positioning of the device.
11. Test the alarm. Refer to the section Testing the
alarm”.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nedis WIFI DS10WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nedis WIFI DS10WT in the language / languages: All languages as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info