654090
1
Zoom out
Zoom in
Previous page
1/2
Next page
English Deutsch Français Italiano
Connect your computer to the projector
using the supplied computer cable (VGA).
Connect the supplied power cord.
Remove the lens cap.
Turn on the projector.
Press the
(POWER) button on the projector cabinet or
the POWER ON button on the remote control.
Select a source.
TIP:
Press the AUTO ADJ. button to optimize an RGB image automatically.
Adjust an image size and position.
[LENS SHIFT]
1. Open the lens shift cover.
2. Turn the lens shift dials clockwise or counterclockwise.
(Horizontal) (Veritical)
3. Close the lens shift cover.
[FOCUS]
Turn the focus ring.
[ZOOM]
Turn the zoom lever.
Turn off the projector.
1. Press the
(POWER) button on the projector cabinet
or the STANDBY button on the remote control.
2. Press either the
(POWER) or the STANDBY button
again.
3. Mount the lens cap.
4. Disconnect all the cables.
Schließen Sie Ihren Computer an den
Projektor mit dem mitgelieferten
Computerkabel (VGA) an.
Schließen Sie das mitgelieferte
Stromkabel an.
Nehmen Sie die Linsenkappe ab.
Schalten Sie den Projektor ein.
Drücken Sie die
(POWER) -Taste am Projektorgehäuse
oder die POWER ON -Taste auf der Fernbedienung.
Wählen Sie eine Quelle aus.
TIPP:
Drücken Sie die Taste AUTO ADJ., um ein RGB-Bild automatisch zu
optimieren.
Stellen Sie eine Bildgröße und eine
Position ein.
[LENS SHIFT]
1. Öffnen Sie die Linsenverstellungsabdeckung.
2. Drehen Sie die Linsenversatzwähler im oder gegen den
Uhrzeigersinn.
(Horizontal) (Vertikal)
3. Schließen Sie die Linsenverstellungsabdeckung.
[FOCUS]
Drehen Sie den Fokusring.
[ZOOM]
Drehen Sie den Zoomhebel.
Schalten Sie den Projektor aus.
1. Drücken Sie die
(POWER) -Taste am
Projektorgehäuse oder die STANDBY -Taste auf der
Fernbedienung.
2. Drücken Sie entweder die
(POWER)-Taste oder die
STANDBY -Taste erneut.
3. Bringen Sie die Linsenkappe an.
4. Trennen Sie alle Kabel.
Connectez votre ordinateur au projecteur
à l’aide du câble d’ordinateur fourni
(VGA).
Connectez le cordon d’alimentation
fourni.
Retirez le capuchon de l’objectif.
Mettez le projecteur sous tension.
Appuyez sur le bouton
(POWER) sur le boîtier du
projecteur ou sur le bouton POWER ON de la télécommande.
Sélectionnez une source.
ASTUCE:
Appuyez sur la touche AUTO ADJ. pour optimiser automatiquement
une image RVB.
Ajuster la taille et la position d’une
image.
[LENS SHIFT]
1. Ouvrez le couvercle de déplacement de l’objectif.
2. Tournez les molettes de déplacement d’objectif dans le
sens des aiguilles d’une montre ou dans le sens inverse.
(Horizontal) (Vertical)
3. Fermez le couvercle de déplacement de l’objectif.
[FOCUS]
Tournez la bague de mise au point.
[ZOOM]
Tournez la commande de zoom.
Mettez le projecteur hors tension.
1. Appuyez sur le bouton
(POWER) sur le boîtier
du projecteur ou sur le bouton STANDBY de la
télécommande.
2. Appuyez à nouveau sur le bouton
(POWER) ou sur le
bouton STANDBY.
3. Montez le capuchon de l’objectif.
4. Débranchez tous les câbles.
Collegare il computer al proiettore
mediante il cavo computer (VGA) in
dotazione.
Collegare il cavo di alimentazione in
dotazione.
Rimuovere il tappo dell’obiettivo.
Accendere il proiettore.
Premere il pulsante
(POWER) sull’involucro del
proiettore o il pulsante POWER ON sul telecomando.
Selezionare una sorgente.
SUGGERIMENTO:
Premere il pulsante AUTO ADJ. per ottimizzare automaticamente
un’immagine RGB.
Regolare la dimensione e la posizione di
un’immagine.
[LENS SHIFT]
1. Aprire il coperchio spostamento obiettivo.
2. Ruotare le ghiere di spostamento obiettivo in senso
orario o antiorario.
(Orizzontale) (Verticale)
3. Chiudere il coperchio spostamento obiettivo.
[FOCUS]
Ruotare l’anello di messa a fuoco.
[ZOOM]
Ruotare il selettore di zoom.
Spegnere il proiettore.
1. Premere il pulsante
(POWER) sull’involucro del
proiettore o il pulsante STANDBY sul telecomando.
2. Premere nuovamente il pulsante
(POWER) o il
pulsante STANDBY.
3. Montare il copriobiettivo.
4. Scollegare tutti i cavi.
Español Português Svenska
한국어
Conecte su ordenador al proyector
utilizando el cable de ordenador
suministrado (VGA).
Conecte el cable de alimentación
suministrado.
Retire la tapa de la lente.
Encienda el proyector.
Pulse el botón
(POWER) en la carcasa del proyector o el
botón POWER ON en el mando a distancia.
Seleccione una fuente.
SUGERENCIA:
Pulse el botón AUTO ADJ. para optimizar una imagen RGB
automáticamente.
Ajuste un tamaño y posición de imagen.
[LENS SHIFT]
1. Abra la tapa de desplazamiento de la lente.
2. Gire los diales de desplazamiento de la lente en sentido
de las manecillas del reloj o en el sentido contrario a las
manecillas del reloj.
(Horizontal) (Vertical)
3. Cierre la tapa de desplazamiento de la lente.
[FOCUS]
Gire el anillo de enfoque.
[ZOOM]
Gire la palanca del zoom.
Apague el proyector.
1. Pulse el botón
(POWER) en la carcasa del proyector
o el botón STANDBY en el mando a distancia.
2. Pulse de nuevo el botón
(POWER) o el botón
STANDBY.
3. Monte la tapa de la lente.
4. Desconecte todos los cables.
Conecte seu computador ao projetor
usando o cabo de computador fornecido
(VGA).
Conecte o cabo de alimentação fornecido.
Remova a tampa da lente.
Ligue o projetor.
Pressione o botão
(POWER) no gabinete do projetor ou
o botão POWER ON no controle remoto.
Selecione uma fonte.
DICA:
Pressione o botão AUTO ADJ. para otimizar automaticamente uma
imagem RGB.
Ajuste um tamanho e posição da imagem.
[LENS SHIFT]
1. Abra a tampa de troca da lente.
2. Gire os discos de troca da lente para a direita ou a
esquerda.
(Horizontal) (Vertical)
3. Feche a tampa de troca da lente.
[FOCUS]
Gire o anel de foco.
[ZOOM]
Gire a alavanca do zoom.
Desligue o projetor.
1. Pressione o botão
(POWER) no gabinete do projetor
ou o botão STANDBY no controle remoto.
2. Pressione o botão
(POWER) ou STANDBY
novamente.
3. Coloque a tampa da lente.
4. Desconecte todos os cabos.
Anslut datorn till projektorn med den
medföljande datorkabeln (VGA).
Anslut den medföljande strömkabeln.
Ta bort linsskyddet.
Slå på projektorn.
Tryck på
(POWER)-knappen på projektorhöljet eller
POWER ON-knappen på ärrkontrollen.
Välj en källa.
TIPS:
Tryck på AUTO ADJ.-knappen för att optimera en RGB-bild
automatiskt.
Justera bildstorlek och position.
[LENS SHIFT]
1. Öppna linsjusteringsskyddet.
2. Vrid linsjusteringsrattarna medurs eller moturs.
(Horisontell) (Vertikal)
3. Stäng linsjusteringsskyddet.
[FOCUS]
Vrid på fokusringen.
[ZOOM]
Vrid zoomreglaget.
Slå av projektorn.
1. Tryck på
(POWER)-knappen på projektorhöljet eller
STANDBY-knappen på ärrkontrollen.
2. Tryck på antingen
(POWER)- eller STANDBY-
knappen igen.
3. Sätt fast linsskyddet.
4. Koppla bort alla kablar.
제공된 컴퓨터 케이블 (VGA) 사용하여
컴퓨터를 프로젝터에 연결합니다.
제공된 전원 코드를 연결합니다.
렌즈 캡을 제거합니다.
프로젝터의 전원을 켭니다.
프로젝터 캐비닛의
(POWER)
버튼이나 리모콘의 POWER ON 버튼을
누릅니다.
소스를 선택합니다.
:
RGB 이미지를 자동으로 최적화하려면 AUTO
ADJ. 버튼을 누릅니다.
이미지의 크기와 위치를 조정합니다.
[LENS SHIFT]
1. 렌즈 이동 커버를 엽니다.
2. 렌즈 이동 다이얼을 시계 방향 또는
시계 반대 방향으로 돌립니다.
(가로) (세로)
3. 렌즈 이동 커버를 닫습니다.
[FOCUS]
초점 링을 돌립니다.
[ZOOM]
레버를 돌립니다.
프로젝터의 전원을 끕니다.
1. 프로젝터 캐비닛의
(POWER)
버튼이나 리모콘의 STANDBY 버튼을
누릅니다.
2.
(POWER) 버튼이나 STANDBY
버튼을 누릅니다.
3. 렌즈 캡을 장착합니다.
4. 모든 케이블을 분리합니다.
Adjust an image size and position.
Turn on the projector.
Remove the
lens cap.
Connect your computer to the
projector.
TIP:
AUTO ADJ.
COMPUTER IN
Connect the supplied power cord.
Fn F1 F
12
or
or
*7N8N6832*
© NEC Display Solutions, Ltd. 2015–2016
Ver. 2 4/16
Printed in China
[FOCUS][LENS SHIFT] [ZOOM]
P502HL/P502WL
Quick Setup Guide
NOTE: The color of the POWER indicator
RED or ORANGE
BLUE
[Standby] [Power On]
Select a source.
Turn off the projector.
or
× 2 times
NOTE: The color of the POWER indicator
BLUE
RED or ORANGE
[Power On] [Standby]
2.
1.
3.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nec NP-P502HL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nec NP-P502HL in the language / languages: All languages as an attachment in your email.

The manual is 5,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nec NP-P502HL

Nec NP-P502HL User Manual - English - 147 pages

Nec NP-P502HL User Manual - German - 147 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info