512542
10
Zoom out
Zoom in
Previous page
1/13
Next page
DEPTH 3100 Installation and Operation ManualNAVMAN
10
Power/data wiring
1 Wire the display unit power/data cable:
The unit requires 12 V DC power. Fit a
power switch and fuse to the power supply
or power the unit from a fused auxiliary
switch. The fuse should be 1 A for up to five
instruments.
If the external beepers and lights require
more than 250 mA DC total, fit a relay.
A single unit can be wired as shown below:
With several instruments, use the optional
junction boxes to simplify wiring, as shown
below:
For information on how to connect NavBus and
to use junction boxes, refer to the NavBus
Installation and Operation manual.
2 Tape or cover any unused wires or connectors
to protect them from water and keep them from
shorting together.
12 V DC
power
NMEA out (optional)
NavBus (optional)
External beepers or
lights (optional)
Red
White
Green
Black
Yellow
Switch Fuse
Orange
Blue
Depth transducer
6-2 Set up
1 Take the boat for a trial run to check that all the
instruments work correctly.
2 If the unit is part of a system of 3100 series
instruments connected by NavBus, set the
backlight group number (see section 4-1):
i Press
+ several times until the
Backlight Group screen is displayed:
ii Press
or to set the backlight group
number.
iii Press
.
3 Set:
The depth units (see section 3-1).
The keel offset (see section 3-5).
6-3 Resetting to factory defaults
All settings may be reset to the manufacturer’s default
settings (see below).
To reset to factory defaults:
1 Turn the power off.
2 Hold down
+ while you turn the power on
and continue to hold the keys down for at least
five seconds.
Backlight
group 3
Depth units ................................................ m
Keel offset ................................................... 0
Depth alarms ............................................Off
SIMULATE mode ......................................Off
Backlight level ............................................ 0
Backlight group ..........................................1
Power/data cables
Junction box
Junction box
Power & data
connections
Power/data cable
NavBus cable
Group 1
Group 2
Power & data
connections
No connection
}
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navman Depth 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navman Depth 3100 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navman Depth 3100

Navman Depth 3100 User Manual - German - 13 pages

Navman Depth 3100 User Manual - Dutch - 13 pages

Navman Depth 3100 User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info