698719

Navitel Navigator 9 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
№ Name Function
20 Point on the map
Short tap on the map marks the point for further operations with it: saving as a
waypoint, adding to the route or viewing the object’s data, and others.
21 Updates*
Provides access to the program and map update menu screen.
22 Track recording
Button for track recording: red dot– recording is on, grey dot – recording is
stopped.
23 Navitel.Trafc*
The icon displays general trafc intensity on ten-point scale. Tapping on the
button
shows the menu for controlling the “Navitel.Trafc” service.
24 Navitel.SMS*
The icon allows reading/sending messages and using coordinates in them. It also
shows the number of unread messages.
25 «Go!»
Tapping on the button gives a command to the program to calculate a route from
the current position or the set initial point to the selected point.
26 «Set Start»
Tapping on the button determines the selected point as a starting point of the
route
(GPSreceiver must be switched off).
27 «Set Finish»
The button is active only when there is an existing route. Pressing the button
continues the route up to the selected point making it the destination point of the
route.
28 «Route through»
The button is active only when there is an existing route. Pressing the button marks
the selected point as a point to be included in the route. The last added
point becomes
the rst one in the route after the starting point.
29 Map Back to map.
*  functionality is available only for devices, having access to the Internet
2.
Routing
2.1
Route to a point selected on the map
You can have a route planned to a point, which can be found and marked on the map and then set as the
destination, while
current position of the device, determined by the GPS system becomes the starting point.
To plan a route press on the map to
mark the point, select “Cursor” [1] and then “Go!” [2]. The program will
offer 3 alternate routes with an approximate distance and time to the nish point [3]. Press «Go!» to start
follow the route [4].
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 1
Fig. 2
Fig. 3
Fig. 4 Fig. 5 Fig. 6
Fig. 7 Fig. 8 Fig. 9
2.3 Manual setting of all route points
To plan a route, where the starting and the destination points are determined manually, rst mark a point
on the map where
you plan to start and press «Cursor» [1] to proceed to the «My route» screen. Tap on
the information panel at the bottom of the
screen [2]. Press «Set start» in the «Properties» screen [3]. The
GPSreceiver must be switched off. The point will be marked
on the map as a starting point. Select a
destination point on the map: tap on the map to mark the point, press «Cursor» [4] and
then press «Go!» in
the «My route» screen [5]. The program will offer 3 alternative routes. Select the route and press «Go!» [6].
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6
3.
Some additional features
For those devices which support Internet connection, various NAVITEL
®
online services, including “Navitel.
Trac” and
“Navitel.Friends” are available.
3.1
Navitel.Trac
The service provides and displays realtime information about density
of trac on the map. If a part of a road is marked green
on the map
this means that road trac here is normal, if it is marked yellow – traf
c is rather dense, orange – trac is heavy,
red – there is a trac jam
[1]. To set the service select “Menu” → “Settings” → “Online services”.
Fig. 1
3.2 Navitel.Friends
The “Navitel.Friends” interactive service allows viewing positions of
friends on the map in realtime mode, to plan a route,
using their coor
dinates, to share coordinates of other points and exchange messages.
To turn the service on select “Menu” →
“Settings” → “Online services”
and set the switch in the “Turn on Navitel.Friends” eld to “On” posi
tion.
Fig. 2
Copyright © 2017 NAVITEL s.r.o.
web: www.navitel.cz
2.2
Route to an address
To have a route calculated to a point of a known address, press “Menu” in the bottom left corner of the screen
[1] → “Find” [2] →
“By address” [3], then press “Select country” and start entering the name of a country
[4]. Press the icon in the upper right part of the screen to hide the keyboard. Select the country [5]. “Select
city”, “Select street” and «Select a building» become active only if the previous elds were lled out [6]. When
all information is entered the object will be shown in the screen [7]. Press «Go!». The program will offer 3
alternative routes [8]. Press «Go!», now you can follow the route [9].
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Navitel Navigator 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Navitel Navigator 9 in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Navitel Navigator 9

Navitel Navigator 9 User Manual - English - 27 pages

Navitel Navigator 9 Quick start guide - German - 2 pages

Navitel Navigator 9 Quick start guide - Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info