707117

Native Komplete Kontrol S25 MK1 Manual

146
Zoom out
Zoom in
Previous page
1/147
Next page
• Walls button: Sets the behavior of the ball when it reaches the range limits. If Walls is set to
on, the ball bounces off the range limit and continues its trip in the opposite direction. If Walls is
set to off, the ball jumps to the opposite range limit and continues from there in the same direc-
tion.
Tempo Mode
Just like Ball mode, Tempo mode simulates a ball that is attracted by the gravity of your finger.
The current position of the ball (the parameter value) is indicated by a blue LED. You can play it in
the same way as Ball mode (see above), however in this case the ball adopts its movement to a
steady beat instead of slowing down and stopping. This enables you to create tempo-synced mod-
ulations with the Modulation Strip. When using KOMPLETE KONTROL as a plug-in, the tempo is
defined by the host. When using the KOMPLETE KONTROL stand-alone application, you can set
the tempo in the header of the software interface. In Ball mode, the following additional settings
are available for the Modulation Strip:
• Display menu: Lets you select one of two ways to display the current state of the Modulation
Strip: Bar or Dot. Bar displays a bar of lit LEDs from the default position of the strip to the cur-
rent value; whereas Dot displays a dot of lit LEDs at the current value.
• Rate menu: Lets you select one of 13 beat divisions to set the beat of the ball’s movement rela-
tive to the tempo, from 1/8 to 4/1, including triplet and dotted time signatures.
• Friction slider: Adjusts the rate at which the ball movement catches up with the tempo. The
higher the Friction value, the quicker the ball will match the beat as set in the Rate menu.
When fully right, the ball matches the given beat instantly.
• Gravity slider: Adjusts the attraction of your finger on the ball: The higher the Gravity value,
the faster the ball will move. This parameter doesn’t affect the ball movement if you throw the
ball with your finger (see above).
• Walls button: Sets the behavior of the ball when it reaches the range limits. If Walls is set to
on, the ball bounces off the range limit and continues its trip in the opposite direction. If Walls is
set to off, the ball jumps to the opposite range limit and continues from there in the same direc-
tion.
Stepped Mode
This mode divides the Modulation Strip into two to five sections, indicated by white LEDs. When
being pressed with a finger, each section triggers one of two to five evenly spaced parameter val-
ues across the whole modulation range. The currently active section (parameter value) is indicated
by three blue LEDs. In Stepped mode, the following additional settings are available for the Modu-
lation Strip:
• Divisions menu: Lets you select the number of sections the Modulation Strip is divided into.
17.3.2. Selecting and Editing a Modulation Strip Mode
In the KOMPLETE KONTROL software, you can select a mode for Modulation Strip and edit its
parameters by performing the following procedure:
1. Go to the Modulation page of the Touch Strip settings.
Configuring Touch Strips
140
… 146


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Native Komplete Kontrol S25 MK1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Native Komplete Kontrol S25 MK1 in the language / languages: English as an attachment in your email.

The manual is 6,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Native Komplete Kontrol S25 MK1

Native Komplete Kontrol S25 MK1 User Manual - German - 218 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info