707484
21
Zoom out
Zoom in
Previous page
1/23
Next page
19
6. Installation Notes
6.1 Handling Mu-so
Take great care when lifting, carrying and inverting
Mu-so to access the mains power, network and digital audio
sockets.
Do not invert your Mu-so or Mu-so Qb so that weight is
borne by its top surface or touch panel. Damage to the
touch panel or top surface nish may result. Do not stand
Mu-so or Mu-so Qb on either end panel or grilles.
6.2 Cleaning Mu-so
Your Mu-so should not need cleaning beyond dusting.
Do not use wax or solvent based cleaning products. If
necessary, a damp cloth may be used on the external
casework, however it is important that all liquids are kept
away from the touch panel and rotary control.
6.3 Grille Replacement
The standard Mu-so and Mu-so Qb black grilles can be
replaced with a range of coloured grilles available through
your local Naim retailer or at: www.naimaudio.com/mu-so.
To remove the Mu-so grille grasp both ends of the grille
simultaneously and gently pull the grille away from the
Mu-so body.
To t a Mu-so grille, line-up the grille studs with the
xing holes and gently push the grille home. Ensure
that the grille is in the correct orientation. The grille
curve runs from top left to bottom right.
To remove the Mu-so Qb grille rst gently peel the top
rear corner of one side grille away from the Mu-so Qb
body. Once the rear edge of one side grille is released,
repeat with the other side. With both sides released the
grille can be gently pulled away from the front.
To t a Mu-so Qb grille rst line-up the front grille
studs and xing holes and gently push the front section
of the grille home. Next similarly t the forward half of
one side grille followed by its rear edge. Repeat with
the other side grille.
Note: Do not touch any of the drive-units while the grilles
are removed.
6.4 Firmware Update
Updated Mu-so and Mu-so Qb rmware may be released
from time to time. Updated rmware may introduce new
features or modify existing behaviour or performance. The
Naim App incorporates a rmware update routine in its
Settings menu.
Note: The Naim App rmware update routine can also be
used to check that the currently installed rmware is up
to date.
Note: The Mu-so setup web page also includes a rmware
update link. This should be used only on the advice of
Naim support sta.
6.5 Lightning Precautions
Mu-so and Mu-so Qb can be damaged by lightning and
should be turned o and disconnected from the mains and
any wired connection when there is risk of lightning.
6.6 Defaults
To return your Mu-so or Mu-so Qb to its default settings
use the pin-tool supplied (or a straightened paperclip) to
press and hold the pin-hole button adjacent to the status
indicator (see Diagrams 2 and 3 respectively for Mu-so and
Mu-so Qb). Hold the button pressed for six seconds. Mu-so
or Mu-so Qb will return to its default settings and restart.
The rotary control and logo illumination will ash while the
factory default procedure is underway.
6.7 Problems?
Consumer protection varies from country to country. In
most territories a retailer must be prepared to take back any
equipment sold if it cannot be made to work satisfactorily.
A problem may be due to a fault in the product or its
installation. Please contact your local distributor, or Naim
Audio directly, if any diculties cannot be resolved. Contact
Naim Audio directly for help and advice if necessary.
6.8 Service and Contact
It is essential that repairs are only carried out by an
authorised Naim retailer or at the Naim Audio factory. Direct
contact to Naim for service or update information should be
made initially through Customer Services:
info@naimaudio.com
For help with Mu-so or Mu-so Qb installation and operation
please visit: www.naimaudio.com/mu-so-support
For email support contact:
mu-sosupport@naimaudio.com
For telephone support call:
+44 (0)333 321 9923 (UK)
+1 800 961 5681 (USA and Canada)
Please quote the product serial number (found on its
underside panel) in all correspondence.
Important: Never switch o your Mu-so or Mu-so Qb or
disconnect it from the mains supply or network while a
rmware update procedure is underway.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Naim Mu-so 1st Generation at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Naim Mu-so 1st Generation in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Naim Mu-so 1st Generation

Naim Mu-so 1st Generation User Manual - German - 24 pages

Naim Mu-so 1st Generation User Manual - Dutch - 24 pages

Naim Mu-so 1st Generation User Manual - French - 24 pages

Naim Mu-so 1st Generation User Manual - Italian - 24 pages

Naim Mu-so 1st Generation User Manual - Polish - 24 pages

Naim Mu-so 1st Generation User Manual - Portuguese - 24 pages

Naim Mu-so 1st Generation User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info