493484
5
Zoom out
Zoom in
Previous page
1/12
Next page
IDENTIFICATION OF CONTROLS
1 STANDBY BUTTON
Toggle this button to set the VISO 1 AP to standby mode or switch
ON the VISO 1 AP from standby mode.
The VISO 1 AP can also be switched ON from standby mode by
pressing any of the panel keys S, M, + or - .
When VISO 1 AP is switched ON from standby mode, the last Source
used will be selected.
NOTE
The Standby (ON/OFF) button will not shut down the VISO 1 AP.
Disconnect the mains power plug from the mains power source to
completely shut down the VISO 1 AP.
2 USB
Allow direct connection and charging of Apple’s iPhone, iPad and
iPod touch using applicable connector (not supplied).
VISO 1 AP may need a software update to be in step with the latest
technology trends. Connect to this input a USB memory stick
containing the software update.
Only authorized NAD distributors or service centers are allowed to
implement a software update.
Check with your authorized NAD distributors for future software
updates.
3 LAN
LAN connection must be setup for wired connection to be established.
Set up a Wired Ethernet broadband router with broadband internet
connection. Your router or home network should have a built-in DHCP
server to consummate the connection.
Connect the VISO 1 AP to a network by directly connecting one
end of an Ethernet cable to the LAN port of your wired Ethernet
broadband router and the other end to VISO 1 AP’s LAN port. Use a
standard straight-through Ethernet cable (not supplied).
NOTE
AirPlay lets you stream music from your AirPlay-enabled device to the
VISO 1 AP. The AirPlay-enabled device and the VISO 1 AP must be in the
same network to send and receive streaming audio with AirPlay.
4 OPTICAL (S/PDIF) IN
Connect OPTICAL IN of VISO 1 AP to the corresponding optical
digital output of sources such as CD, DVD or BD players, digital cable
box, digital tuners and other applicable components.
The optical digital input is 24/96 capable.
The optical digital input accepts PCM audio signal only. Ensure that
the digital audio output of your source is set to PCM before it is
connected to the optical digital input of VISO 1 AP.
5 AC MAINS INPUT
The VISO 1 AP comes supplied with a separate detachable mains
power cord. There are 2 supplied power cords – select applicable
type for your usage. Before connecting the plug to the mains
powers source, connect rmly rst the other end to VISO 1 AP’s AC
Mains input socket.
Always disconnect the mains power plug from the mains power
source rst, before disconnecting the cable from the VISO 1 AP’s AC
Mains input socket.
Power Rating: 100 - 240V ~50/60Hz 35W.
NOTES
Disconnect the mains power plug from the mains power source to
completely shut down the VISO 1 AP.
The VISO 1 AP will power up to its last Source setting prior to being shut
down.
6 S, M,+/-
Press “+” to increase the volume level; “ - ” to lower it.
Toggle “M” to temporarily mute audio level or restore audio from
mute mode. “S” will continuously ash at mute mode.
Pressing “+” or “ - ” will restore audio from mute mode.
“S” indicator ashes whenever a remote control command is
received.
Toggle “S” button to sequentially select through the following
source modes
a AirPlay/iOS/iPod nano device
b Bluetooth device
c Optical (S/PDIF) source
Below is a description of the various color modes of the S-indicator light.
S-INDICATOR LIGHT COLOR FUNCTION/DESCRIPTION
Alternately ashing in red and green
Ready to be congured
Factory default setting
Flashing green Access point/setup mode
Solid green AirPlay/iOS/iPod nano device source mode
Solid blue Bluetooth device source mode
Solid amber Optical (S/PDIF) source mode
O (no color) Standby mode
1
2
6
3
4
5
5
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD Viso 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD Viso 1 in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD Viso 1

NAD Viso 1 Quick start guide - English - 14 pages

NAD Viso 1 User Manual - German - 12 pages

NAD Viso 1 Quick start guide - German - 14 pages

NAD Viso 1 User Manual - Dutch - 10 pages

NAD Viso 1 User Manual - French - 12 pages

NAD Viso 1 Quick start guide - French, Italian, Portuguese - 14 pages

NAD Viso 1 User Manual - Swedish - 12 pages

NAD Viso 1 Quick start guide - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info