No sound from all channels.• AC power unplugged.• Check AC cable connection and outlet.
• Power not switched on.
• Outlet has no power.
• Mute function is activated.• Toggle [MUTE] button to deactivate Mute
function.
No sound from some channels.• Faulty/missing cables.• Check cables.
• “Speaker Conguration” channel (s) set to “OFF”.• Check “Speaker Conguration” menu.
No sound from surround channels.• No surround listening mode is engaged.• Select appropriate listening mode.
• Surround channels set to “OFF” on “Speaker
Conguration” menu.
• Correct “Speaker Conguration” or “Speaker
Levels” settings.
• Surround channels level set too low on
“Speaker Levels” menu.
No sound from Subwoofer.• Subwoofer is o, not powered or improperly
connected.
• Power up subwoofer, check subwoofer’s
AC outlet or check connections.
• Subwoofer set to “OFF” on “Speaker
Conguration” menu.
• Correct “Speaker Conguration” or “Speaker
Levels” settings.
• Subwoofer level set too low on “‘Speaker Levels”
menu.
No sound from Center channel.• Source is a 2/0 (etc.). Dolby Digital or DTS
recording without center channel.
• Play a known 5.1-channel recording or
select Dolby Pro Logic IIx Music mode.
• Center set to “OFF” on “Speaker Conguration”
menu.
• Correct “Speaker Conguration” or “Speaker
Levels” settings.
• Center level set too low on “Speaker Levels”
menu.
No Dolby Digital/DTS.• Source’s digital output is not connected to a
T 787 digital input.
• Check connections.
• Source component not congured for
multichannel digital output.
• Check source component setup.
T 787 does not respond to remote control
commands.
• Batteries are at or incorrectly inserted.• Check batteries.
• Infrared receiver (IR) window of T 787 or IR
transmitter of the remote control is obstructed.
• Check IR windows and ensure clear line-
of-sight from remote to T 787.
• T 787 front panel is in very bright sunlight or
ambient light.
• Reduce sunlight/room lighting.
No RDS information.• Station signal too weak.• Check station tuning. Adjust or replace
antenna.
• Station not transmitting RDS data.• Tune to an RDS station that supports
program-service name (PS mode) and
radio-text mode (RT).
Display shows “No Service List”.• DAB antenna not connected properly.• Check the connection and position of DAB
antenna.
• No DAB coverage in the area.• Call your local DAB broadcast providers for
coverage information.
RESET T 787 TO FACTORY DEFAULT SETTINGS
Using front panel buttons only, press and hold [ a SOURCE], then press and release [FRONT INPUT/MP] - “Factory Reset..complete.” is shown in the front panel
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for NAD T 787 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of NAD T 787 in the language / languages: English as an attachment in your email.
The manual is 7,77 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
