602918
49
Zoom out
Zoom in
Previous page
1/52
Next page
REFERENCE
TROUBLESHOOTING
CONDITION POSSIBLE CAUSES POSSIBLE SOLUTIONS
No sound from all channels. • AC power unplugged. • Check AC cable connection and outlet.
• Power not switched on.
• Outlet has no power.
• Speaker A (or Speaker B) is not activated. • Activate Speaker A (or Speaker B) by pressing
the corresponding front panel or HTRC 1
button.
No sound from some channels. • Faulty/missing cables. • Check cables.
• ’Speaker Conguration channel (s) set to
“OFF”.
• Check ‘Speaker Conguration menu.
• Power-amp or speaker-connections faulty. • Check power amp, cabling, and speakers.
No sound from surround channels. • No surround listening mode is engaged. • Select appropriate listening mode.
• Surround-channels set to “OFF” on ‘Speaker
Conguration menu.
• Correct ‘Speaker Conguration or ‘Speaker
Levels settings.
• Surround-channels level set too low on
‘Speaker Levels’ menu.
No sound from Subwoofer. • Subwoofer is o, not powered or improperly
connected.
• Power-up subwoofer, check Subs AC outlet
or check connections.
• Subwoofer set to “OFF” on ‘Speaker
Conguration menu.
• Correct ‘Speaker Conguration or ’Speaker
Levels settings.
• Sub level set too low on ‘Speaker Levels
menu.
No sound from Center channel. • Source is a 2/0 (etc.). Dolby Digital or DTS
recording without center channel.
• Play a known 5.1-channel recording or select
Dolby Pro Logic IIx Music mode.
• Center set to “OFF” on ‘Speaker Conguration
menu.
• Correct ‘Speaker Conguration or ‘Speaker
Levels settings.
• Center level set too low on ‘Speaker Levels
menu.
No Dolby Digital/DTS. • Sources digital output is not connected to a
T 785 digital input.
• Check connections.
• Source component not congured for
multichannel digital output.
• Check source component setup.
No video display. • Resolution setting is not supported by the
TV/Monitor.
• To restore video display, press and hold both
front panel buttons LISTENING MODE and
TONE DEFEAT and then release both buttons.
T 785 does not respond to HTRC 1 remote. • Batteries are at or incorrectly inserted. • Check batteries.
• IR transmitter window on remote or IR A/V
Receiver window on T 785 is obstructed.
• Check IR windows and ensure clear line-of-sight
from remote to T 785.
• T 785 front panel is in very bright sunlight or
ambient light.
• Reduce sunlight/room lighting.
T 785 does not respond to front panel
commands or remote control.
• Microprocessor error.
• Power-down the T 785 via the rear panel Power
switch and unplug it from the AC outlet.
• T 785 may have over heated. • Wait ve minutes, re-connect and power up.
• 12V TRIGGER IN/OUT is set to AUTO position. • Switch 12V TRIGGER IN/OUT to OFF position.
Factory defaults for 120V version only : Press simultaneously Source + Front Input/MP
Factory defaults for 230V version only : Press simultaneously Source + Front Input/MP
Audyssey Auto Calibration settings along with other stored presets and settings will all be deleted upon restoring your T 785 to its factory defaults.
49
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 785 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 785 in the language / languages: English as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 785

NAD T 785 User Manual - German - 52 pages

NAD T 785 User Manual - Dutch - 52 pages

NAD T 785 User Manual - French - 52 pages

NAD T 785 User Manual - Italian - 52 pages

NAD T 785 User Manual - Swedish - 50 pages

NAD T 785 User Manual - Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info