606564
30
Zoom out
Zoom in
Previous page
1/32
Next page
3030
3030
30
TROUBLESHOOTING
CONDITIONCONDITION
CONDITIONCONDITION
CONDITION
NO SOUND FROM ALL CHANNELS
NO SOUND FROM SOME CHANNELS
NO SOUND FROM SURROUND
CHANNELS
NO SOUND FROM SUBWOOFER
NO SOUND FROM CENTER CHANNEL
NO DOLBY DIGITAL/DTS
T 754 DOES NOT RESPOND
TO HTR 2 REMOTE
T 754 DOES NOT RESPOND
TO FRONT-PANEL COMMANDS
OR REMOTE CONTROL
POSSIBLE CAUSE(S)POSSIBLE CAUSE(S)
POSSIBLE CAUSE(S)POSSIBLE CAUSE(S)
POSSIBLE CAUSE(S)
AC power unplugged
Power not switched on
Outlet is unpowered
Tape Monitor is engaged
Faulty/missing cables
<Speaker Settings> channel (s) set to "None"
Power-amp or speaker-connections faulty
No surround listening mode is engaged
Surround-channels set to "None" on
<Speaker Settings> menu
Surround-channels level set too low on
<Channel Levels> menu
Subwoofer is off, unpowered,
or improperly connected
Subwoofer set to "OFF" on
<Speaker Settings> menu
Sub level set too low on
<Channel Levels> menu
Source is a 2/0 (etc.) Dolby Digital or
DTS recording without center channel;
Center set to "OFF" on
<Speaker Settings> menu
Center level set too low on
<Channel Levels> menu
Source's digital output is not connected to
a T 754 digital input
Source component not configured for multi
channel digital output
Batteries are flat or incorrectly inserted
IR transmitter window on remote, or
IR receiver window on T 754 is obstructed
T 754 front panel is in very bright sunlight
or ambient light
Microprocessor error
T 754 may have over heated
12V TRIGGER IN/OUT is set to AUTO or
in position
POSSIBLE SOLUTIONS(S)POSSIBLE SOLUTIONS(S)
POSSIBLE SOLUTIONS(S)POSSIBLE SOLUTIONS(S)
POSSIBLE SOLUTIONS(S)
Check AC cable, connection, and outlet
Disengage Tape Monitor
Check cables
Check <Speaker Settings> menu
Check power amp, cabling, and speakers
Select appropriate listening mode
Correct <Speakers Settings> or
<Channel Levels> settings
Power-up subwoofer, check sub's
AC outlet, or check connections
Correct <Speakers Settings> or
<Levels setup> settings
Play a known 5.1-channel recording or
select Dolby Pro Logic or Mono mode
Correct <Speakers Settings> or
<Channel Levels> settings
Change Main/Zone DSP Decoding from
7.1/OFF to 5.1/2.0
Check connections
Check source component setup
Change Main/Zone DSP Decoding from
7.1/OFF to 5.1/2.0
Check batteries
Check IR windows and ensure clear
line-of-sight from remote to T 754
Reduce sunlight/room lighting
Power-down the T 754 via the front-panel
Power button
and unplug it from the AC
outlet
Wait five minutes, re-connect and
power up
Switch to OFF position
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 754 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 754 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 754

NAD T 754 User Manual - German - 32 pages

NAD T 754 User Manual - Dutch - 32 pages

NAD T 754 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info