493498
6
Zoom out
Zoom in
Previous page
1/48
Next page
1 STANDBY BUTTON
Press this button to switch ON the T 187 from standby mode. The
Standby LED indicator will turn from amber to blue and illuminate
the VFD. Pressing the STANDBY button again turns the unit back to
standby mode.
The T 187 can also be switched ON from standby mode by pressing
any of the front panel buttons.
NOTE
The rear panel POWER switch must be in the ON position for the Standby
button to activate.
2 STANDBY LED
This indicator will light up amber when the T 187 is at standby
mode.
When the T 187 is powered up from standby mode, this indicator
will illuminate blue.
• If a Zone (Zone 2, Zone 3 or Zone 4) is ON and STANDBY button
is pressed to switch the T187 to standby mode, the VFD will be
extinguished but the STANDBY LED remains illuminated blue.
This indicates a Zone (Zone 2, Zone 3 or Zone 4) is still active. The
corresponding active Zone icon(s) will also remain displayed in the VFD.
• In order to completely shut down the T 187 with Zone 2, Zone 3
and/or Zone 4 still ON, press and hold STANDBY button until the
STANDBY LED turns amber.
3 NAVIGATION and ENTER BUTTONS
The navigation ([d/f/a/s]) and [ENTER] buttons have various
applications specic to given modes. The middle round button is
designated as [ENTER] button; this is normally pressed to complete a
selection, procedure, sequence or other applicable functions.
AM/FM mode
Toggle [ENTER] button to switch between Tune and “Preset mode.
Select “Tune mode.
Pressing momentarily the [a/s] button will manually scan the AM
or FM band.
Press and hold [a/s] for more than 2 seconds to search up or down;
the T 187’s tuner will stop at the next suciently strong signal it
encounters.
Note that this function “wraps” - that is, it will continue to search
from one end of the AM or FM band to the other until it stops at a
strong signal.
Toggle [ENTER] button to switch between Tune and “Preset mode.
Select “Preset” mode.
• Use [d/f] to step up or down AM/FM Presets. Unused presets are
skipped over. Note that Presets must have been previously stored.
Refer also to the item about STORING PRESETS (AM/FM/XM/DAB) at the
LISTENING TO AM/FM RADIO section of the OPERATION page.
XM mode (120V version model only)
Use the front panel [d/f] and [ENTER] buttons in combination
with the [MENU] button to select through applicable XM menu
options.
DAB mode (230V version model only)
Use front panel [a/s] and [ENTER] buttons in combination with
[MENU] button to select through applicable DAB menu options.
4 REMOTE SENSOR
Point the HTR 8 remote control at the remote sensor and press the
buttons.
Do not expose the remote sensor of the T 187 to a strong light
source such as direct sunlight or illumination. If you do so, you may
not be able to operate the T 187 with the remote control.
Distance: About 23ft (7m) from the front of the remote sensor.
Angle: About 30
o
in each direction of the front of the remote sensor.
IDENTIFICATION OF CONTROLS
FRONT PANEL
NAD T187
© NAD T 187
AV Surround Sound Preamp Processor T 187
a SOURCE s
VOLUME
MEMORY
sa
d
f
INFO
DELETE
AM/FM/DB TUNER MODE LISTEN MODE TONE TONE DEFEAT FRONT INPUT/MP
1
8 9 10 11 12 13 14 15 16 17 18
2 3 4 5 6 7
4 5 6 7
17
A B C ED
12 13 14 15 1611
1 2 3
181098
6
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD T 187 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD T 187 in the language / languages: English as an attachment in your email.

The manual is 8,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD T 187

NAD T 187 User Manual - German - 48 pages

NAD T 187 User Manual - Dutch - 48 pages

NAD T 187 User Manual - French - 48 pages

NAD T 187 User Manual - Italian - 48 pages

NAD T 187 User Manual - Swedish - 48 pages

NAD T 187 User Manual - Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info