745036
5
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
WHAT’S IN THE BOX
Packed with your M17 you will nd
Quick Setup Guide
BluOS Kit containing USB Hub, Wi-Fi Dongle, Bluetooth USB Micro
Adapter and USB to USB Cable Extender
HTRM 2 remote control with 4 AA batteries
BluOS-Ready Flyer/Bluesound player
ZR 7 zone remote control with 3V CR2025 battery
Measurement microphone with USB Mic adapter and phone jack
adapter
Detachable mains power cord
Four pieces of magnetic feet
Four cables of female 3-pin mini XLR to male 3-pin XLR
Cleaning cloth
USB ash drive
SAVE THE PACKAGING
Please save the box and all of the packaging in which your M17 arrived.
Should you move or otherwise need to transport your M17, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
25 feet/8 meters, between the M17’s front panel and your primary
listening/viewing position - this will ensure reliable infrared remote control
communications. The M17 generates a modest amount of heat, but
nothing that should trouble adjacent components.
DEFAULT SOURCE SETTINGS
The following table lists the default SOURCE settings. Note that the Audio
input settings show both digital and analog audio input. Digital input will
always take precedence over analog audio input even if both are present.
SOURCE AUDIO INPUT VIDEO INPUT
Source 1 HDMI 1/Stereo 1 HDMI 1
Source 2 HDMI 2/Stereo 2 HDMI 2
Source 3 HDMI 3/Stereo 3 HDMI 3
Source 4 HDMI 4/Stereo 4 HDMI 4
Source 5 HDMI 5/Stereo 5 HDMI 5
Source 6 (BluOS) BluOS BluOS
To modify the above default settings and for a better understanding of
source setting and combinations, please refer to the item about “SOURCE
SETUP in the “USING THE M17 - SETUP MENU” segment of the “OPERATION”
section.
NOTE
Digital input will always take precedence over analog audio input if
both are present.
RESTORING M17 TO ITS FACTORY DEFAULT SETTINGS
1 Press and hold front panel’s “Main display.
2 Select “Setup display option.
3 Select “Factory Reset display option.
4 Select between “Yes (NTSC)” and Yes (PAL) to select video mode after
Factory Reset. Select “No if you decide not to reset your M17.
5 Factory reset is complete after the display below and the M17 going to
standby mode.
INTRODUCTION
GETTING STARTED
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M17 V2i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M17 V2i in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M17 V2i

NAD M17 V2i User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info