745038
6
Zoom out
Zoom in
Previous page
1/14
Next page
ENGLISH
1 IR IN
This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or IR output of another compatible device to
allow control of the M10 from a remote location.
To program IR Remote commands into your M10 via IR IN, go
to theSettings menu of the BluOS App,selectPlayer and
then IR remote.Simply select the function desired from theIR
Remotemenu, point an IR remote control at the IR repeater and
press the button to perform that function. Once successful, a
check-mark will appear beside the programmed function. You
can now use the IR remote control to command the M10 with the
programmed functions.
2 +12V TRIGGER OUT
The +12V TRIGGER OUT is used for controlling external equipment
equipped with a +12V trigger input.
Connect this +12V TRIGGER OUT to the other equipment’s
corresponding +12V DC input jack using a mono cable with 3.5mm
male plug.
This output will be 12V when the M10 is ON and 0V when it is either
OFF or in standby mode.
3 ANALOG IN 1-2
Input for line level sources such as CD player, tuner or any
compatible devices. Use dual RCA-to-RCA cable to connect the
source devices left and right Audio Output to these line input
ports.
The sources will appear as Analog Input 1” and Analog Input 2” in
the navigation drawer of the BluOS App.
4 PRE OUT
Use dual RCA-to-RCA cable to connect PRE-OUT to the
corresponding analog audio input of compatible devices such
as ampliers, receivers or other applicable devices. This makes it
possible to use the M10 as a pre-amplier to such devices.
5 SUBW (SUBWOOFER) 1, 2
Connect SUBW 1 and/or 2 to the low level input of corresponding
powered subwoofer.
Low frequency information below the selected crossover setting is
sent to the connected subwoofer.
6 OPTICAL IN/COAXIAL IN
Connect to corresponding optical and coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
7 HDMI ARC
Connect to TV that supports HDMI Control (CEC) and Audio Return
Channel (ARC) functions. Both functions are possible if external
devices that also support both features are interconnected with
M10 via HDMI connection.
Use HDMI cable to connect HDMI ARC to corresponding HDMI ARC
port of TV.
With ARC connection established, M10 will output audio signal
from TV.
IMPORTANT
Ensure that the audio setting/format of ARC-connected devices to M10
is set to PCM only.
Only audio output signal from TV is supported by HDMI ARC port. There
is no video output at HDMI ARC port of M10.
8 SERVICE
These USB port and tact switch are for servicing purposes only. Not
for consumer use.
IDENTIFICATION OF CONTROLS
REAR VIEW
6
4 5 6 9 8 107 8
11 12 13
21 3
ATTENTION!
Please ensure that the M10 is powered o or unplugged from the mains power outlet before making any connections. It is also advisable to power down or
unplug all associated components while making or breaking any signal or AC power connections.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M10 in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M10

NAD M10 User Manual - German - 14 pages

NAD M10 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info