493489
10
Zoom out
Zoom in
Previous page
1/14
Next page
NAD USB AUDIO
In order to stream your computer audio via M51, ensure that the Sound or
Audio device setting of your computer is set to “NAD Audio 2.0 Output”.
A NAD USB Audio driver can be downloaded via the NAD website link
http://nadelectronics.com/products/masters-series/M51-Direct-
Digital-DAC. Download “NAD USB Audio driver from the “Manuals/
Downloads” tab. Install this NAD USB Audio driver to your computer by
following the instructions provided.
MINIMUM PC SYSTEM REQUIREMENT
Microsoft Windows XP Service Pack 2 or higher, Microsoft Windows 7
FOR MAC USERS
Minimum Mac OS X Snow Leopard (version 10.6) and later versions already
include “NAD USB Audio” driver. Update your Mac OS if you cannot locate
NAD USB Audio driver.
IMPORTANT NOTICE
The use of the NAD USB Audio driver downloaded through the NAD site
is done at the customer’s own discretion and risk. The customer will be
solely responsible for any damage to his/her computer system or loss of
data arising out of or in connection with the use of this software driver.
In no event shall NAD be liable for any direct, indirect, incidental, special,
exemplary, or consequential damages including negligence or otherwise
arising in any way out of the use of this software driver.
SETUP MENU
The M51 has the following congurable features. To access these features,
use the following (all function keys mentioned below are with reference to
the remote control).
1 Press [SETUP] and then use [F /D ] to scroll through the following
options - Volume Setup, Auto Standby and Auto Display.
2 Navigation
[F /D] : Scroll up/down the options.
[S] or [ENTER] : Select an option or go to the next layer of options.
[A] : Return to previous page or options.
VOLUME SETUP
The M51 VOLUME control function is dependent upon the Volume Setup
menu setting. Volume can either be set to “Fixed” or Variable. Press
[SETUP] button to launch Volume Setup menu. From Volume Setup
menu, press [ENTER] or [S] to bring up “Fixed” or Variable settings.
Fixed
If Volume is set to “Fixed”, audio output level is xed and the M51’s
Volume Control is bypassed.
Press [D/F] to set a desired preset dB level. Conrm setting by
pressing [ENTER] or [S]. Thereafter, audio output from M51 can be
adjusted by using the volume control of the separate amplier the
M51 is linked into.
If Volume Setup is set to “Fixed”, remote control’s [VOL 5/6] will
have no eect and eectively disabled.
Variable
When set to Variable, the Volume level is directly adjustable using
the remote control’s [VOL 5/6] button. Correspondingly, audio
output from M51 can be adjusted by using the volume control of
the separate amplier the M51 is linked into.
AUTO STANDBY
The M51 has automatic standby mode feature that can be turned ON or
OFF.
On: M51 will automatically go to standby mode if there are no user
interface interaction and no active source within 30 minutes.
O: M51 will not go to standby mode at any time unless directly initiated
by pressing front panel Standby button or remote control’s [OFF] button.
The default setting of Auto Standby is “O.
AUTO DISPLAY
Auto Display gives the user the option to turn o the Vacuum Fluorescent
Display after 15 minutes of no user interaction and no remote control
command.
Enable: Display is turned o in the absence of any user interaction and
remote control command within 15 minutes. Display wakes up or becomes
illuminated again as soon as there is user interaction or remote control
command.
Disable: Display remains illuminated even in the absence of any user
interaction and remote control command within 15 minutes. This is the
default setting.
POLARITY
Allow compensation for recordings that have reversed polarity.
Positive: A positive sine wave at the input remains positive at the
output. Polarity is defaulted to “Positive setting.
Reversed: A positive sine wave at the input is negative (inverted) or
reversed at the output.
RENAMING A SOURCE INPUT
A particular source input can be renamed according to your preference.
You can use up to 16 characters in renaming a source input. Below is
the procedure on how to rename a source input. Note that all buttons
mentioned below are with reference to the remote control.
Example: Rename “HDMI 1” to “BD PLAYER”.
1 Press [HDMI 1] button to go to HDMI 1 source. “HDMI 1” is shown in the
upper section of the VFD.
2 Then, press and hold [DISP] button until “HDMI 1” is shown in the upper
section of the VFD and with “H” ashing.
3 Within 5 seconds, toggle the [D/F] buttons to select the rst character
(“B” from the alphabetical list). The ranges of characters available are A-Z,
a-z, _ (space) and 0-9.
4 Press [S] or [ENTER] to select the character and at the same time move
on to the next character. Press [A] to return to the previous character.
Repeat steps 3 and 4 for each character in sequence.
5 Complete the renaming process by pressing the [DISP] button again to
save the new Source input name.
NOTES
The renaming process will be automatically terminated if no button
is pressed within 5 seconds. Any renamed characters at the time of
termination will be not saved.
USING THE M51
OTHER FEATURES
10
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSK A РУССКИЙ
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD M 51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD M 51 in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD M 51

NAD M 51 Quick start guide - English - 2 pages

NAD M 51 User Manual - German - 14 pages

NAD M 51 User Manual - Dutch - 14 pages

NAD M 51 User Manual - French - 14 pages

NAD M 51 User Manual - Italian - 14 pages

NAD M 51 User Manual - Swedish - 14 pages

NAD M 51 User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info