562257
5
Zoom out
Zoom in
Previous page
1/10
Next page
IDENTIFICATION OF CONTROLS
1 o (STANDBY)
With the corresponding end of the mains power cord connected
to the AC mains input of the D 3020 and the plug connected to a
mains power source, press o (Standby) to switch ON the D 3020
from standby mode. The Standby indicator will turn from amber to
bright/white color.
Press and hold o (Standby) until D 3020 switches back to standby
mode.
AUTO STANDBY
The D 3020 can be setup to automatically go to standby mode if there
is no user interface interaction and no active source input within
30 minutes. Auto standby mode can be enabled or disabled by the
following steps.
Enable Auto Standby mode
While at standby mode, press and hold the remote control’s “OFF”
button until the whole display wakes up and ashes once.
At operating mode and with auto standby enabled, the D 3020
will automatically go to standby mode if there is no user interface
interaction and no active source input within 30 minutes.
Disable Auto Standby mode
While at standby mode, press and hold the remote control’s “OFF”
button until the whole display wakes up and ashes twice.
At operating mode and with auto standby disabled, D 3020 will not
automatically go to standby mode even if there is no user interface
interaction and no active source input within 30 minutes. Press
o(Standby) to switch D3020 from operating mode to standby
mode.
2 S (SOURCE)
Toggle to cycle through the Sources (OPT1, OPT2, COAX, USB, AUX
1, AUX 2, BT) and select desired Source.
3 VOLUME
Adjust audio level by turning clockwise or counterclockwise.
· Rotating the volume knob will automatically restore audio from
mute mode.
4 DISPLAY
Illuminate the selected or active Source (OPT1, OPT2, COAX, USB,
AUX 1, AUX 2, BT) and current audio level.
IMPORTANT NOTE
Display will not adjust to the orientation of the unit. Display is best
viewed with the D3020 in vertical position as shown above.
5 PHONES
A 3.5 mm stereo jack socket is supplied for headphone listening.
Specially designed low noise headphone circuitry can accommodate a
wide range of phones, even 600 Ohm studio models.
Adjust headphone audio level by rotating the VOLUME control
clockwise or counterclockwise.
Ensure that the volume control is turned to minimum (fully
counterclockwise) before connecting or disconnecting
headphones. Listening at high levels can damage your hearing.
Inserting a headphone jack into this socket automatically switches
o the loudspeakers.
6 BASS EQ
Boost overall bass response by at least 6 dB. “BASS” is illuminated in
the display with BASS EQ enabled.
Toggle to enable or disable BASS EQ.
7 AUX 1
Use a twin RCA-to-RCA lead to connect these sockets to the left and
right analog output of a CD player, preamplier, processor or other
applicable devices.
8 AUX 2
Connect to corresponding output connectors of other audio
devices using a 3.5mm stereo plug (not supplied). This input also
accepts headphone/digital audio output from a MacBook Pro.
Install the supplied TOSLINK mini-adapter to convert this input into
an additional digital optical input (OPT2).
9 SUBW
Connect the SUBW output to powered (“active”) subwoofers or to
power amplier channels driving a passive system.
USB
DIGITAL AUDIO INPUT
LEFT
SPEAKERS
+12V
TRIGGER
IN
LR
COAXIALOPTICAL 1
RIGHT
AUX 1
OPTICAL 2
ANALOG AUDIO INPUT
Bass EQ (SERVICE)
SUBW
AUX 2
6 7 8 9 10
11 12 13 14
1
2
3
4
5
5
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD D 3020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD D 3020 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD D 3020

NAD D 3020 Quick start guide - English - 2 pages

NAD D 3020 User Manual - German - 10 pages

NAD D 3020 User Manual - Dutch - 12 pages

NAD D 3020 User Manual - French - 10 pages

NAD D 3020 User Manual - Swedish - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info