577718
5
Zoom out
Zoom in
Previous page
1/8
Next page
IDENTIFICATION OF CONTROLS
1 DIGITAL AUDIO INPUT (COAXIAL 1, COAXIAL 2, OPTICAL 1,
OPTICAL 2)
Connect to the corresponding optical or coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
2 USB
Asynchronous USB 24 bit/192 kHz input assures lowest jitter for best
musical performance.
Using Type A to Type B cable connector (not supplied), interface
computer audio to this asynchronous Type B USB input to directly
stream 24/192 PCM content from your PC or MAC.
Ensure that the Sound or Audio device setting of your computer is
set to “NAD USB Audio”.
MINIMUM PC SYSTEM REQUIREMENT
Microsoft Windows XP Service Pack 2 or higher, Microsoft Windows 7
FOR MAC USERS
Minimum Mac OS X Snow Leopard (version 10.6) and later versions
NOTE
Download and install to your PC the NAD USB Audio driver from the
Manuals/Downloads tab of the NAD web address http://nadelectronics.
com/products/digital-music/D-1050-USB-DAC.
3 SERVICE
Use for servicing purposes only. Not for consumer use.
4 5V DC IN
Connect corresponding end of the Switch Mode Power Supply
(SMPS) to the 5V DC IN of D 1050 and then connect the SMPS plug
to a mains power source.
Before connecting the SMPS plug to the mains power source,
ensure rst that the other end of the SMPS connected to the 5V DC
IN socket is rmly connected.
Always disconnect the SMPS plug from the mains power source
rst, before disconnecting from the 5V DC IN socket the other end
of the SMPS.
5 2 CHANNEL AUDIO OUT (BALANCED, UNBALANCED)
Connect to corresponding balanced and/or unbalanced audio input
of compatible devices such as receivers, ampliers, audio processors
or music system.
Audio output from 2 CHANNEL AUDIO OUT (BALANCED and
UNBALANCED) is xed.
Adjust audio level via the volume control of the device that D 1050
is hooked up.
6 o (STANDBY)
With the corresponding end of the SMPS connected to the 5V DC
IN socket of the D 1050 and the SMPS plug connected to a mains
power source, press o (Standby) to switch ON the D 1050 from
standby mode. The Standby indicator will turn from amber to
bright/white color. Pressing o (Standby) again turns the unit back
to standby mode.
7 S (SOURCE)
Toggle to cycle through the Sources (COAXIAL 1, COAXIAL 2,
OPTICAL 1, OPTICAL 2 and USB) and select desired Source.
8 VOLUME (applicable for headphone listening only)
Adjust headphone audio level by turning clockwise or
counterclockwise. This volume control does not aect the 2
CHANNEL AUDIO OUT level.
9 DISPLAY
Illuminate the selected or active Source (COAX 1, COAX 2, OPT 1,
OPT 2 or USB) and corresponding sample rate of selected audio
source (32, 44.1, 48, 96 or 192).
10 PHONES
A 3.5 mm stereo jack socket is supplied for headphone listening.
Specially designed low noise headphone circuitry can accommodate a
wide range of phones, even 600 Ohm studio models.
Adjust headphone audio level by rotating the VOLUME control
clockwise or counterclockwise.
Ensure that the volume control is turned to minimum (fully
counterclockwise) before connecting or disconnecting
headphones. Listening at high levels can damage your hearing.
When a headphone is connected to PHONES, 2 CHANNEL AUDIO
OUT is muted.
R L
2 CHANNEL
COAXIAL 2 OPTICAL1 2COAXIAL 1
DIGITAL AUDIO INPUT
SERVICE
5V DC IN
-
+
BALANCED
R L
UNBALANCED
© NAD D1050
USB
AUDIO OUT
6
7
8
1 2 3 4
5
9
10
5
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD D-1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD D-1050 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD D-1050

NAD D-1050 Quick start guide - English - 2 pages

NAD D-1050 User Manual - German - 8 pages

NAD D-1050 User Manual - Dutch - 8 pages

NAD D-1050 User Manual - French - 8 pages

NAD D-1050 User Manual - Swedish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info