667814
6
Zoom out
Zoom in
Previous page
1/8
Next page
1 STATUS INDICATOR
This is an indicator of network connectivity. Below is a table of the LED
blink codes and their corresponding descriptions.
LED BLINK CODE DESCRIPTION
Short blue ash, then red Powering up, rebooting
Solid red Booting up
Solid red Cannot boot up; drive error
Solid white Indexing
Solid blue
Connected to network – ready to
use with BluOS App
Red pulse No internet gateway
Alternate ashing red and green Upgrade mode
Flashing red Factory reset in progress
2 STANDBY BUTTON
Press and hold this button to bring the CI 720 to standby mode.
3 AC MAINS INPUT
The CI 720 comes supplied with two separate AC mains power
cords. Select the AC mains power cord appropriate for your
region. An adaptor may be necessary in certain regions.
Always disconnect the plug from the wall outlet first, before
disconnecting the other end from CI 720’s AC Mains input socket.
4 IR IN
This input is connected to the output of an IR (infrared) repeater
(Xantech or similar) or the IR output of another component to allow
control of the CI 720 from a remote location.
To program IR Remote commands into your CI 720 via IR IN, select
from the App the Settings Menu - Player-IR Remote.Simply
select the function desired from theIR RemoteMenu, point an IR
remote control at the IR repeater and press the button to perform
that function. Once programmed, a check-mark will appear in the
Congure IR Trigger function list.
5 OPTICAL IN
Connect to the corresponding optical digital output of sources such
as CD or BD/DVD players, digital cable box, digital tuners and other
applicable components. The source will appear as an Optical Input
in the navigation drawer of the BluOS App.
6 ANALOG IN
Input for line level sources such as CD player, tuner or any
compatible devices. Use a twin RCA-to-RCA lead to connect the
source devices left and right Audio Output to this input. The source
will appear as an Analog Input in the navigation drawer of the BluOS
App.
7 SPEAKER OUT
Connect the speaker cables to the supplied speaker terminal block
with reference to CI 720’s speaker terminal markings on the rear
panel.
Connect CI 720s Right speaker terminals marked “R +” and “R-” to
the corresponding “+” and “-“ terminals of your designated right
speaker. Repeat the same for CI 720’s Left speaker terminals and
corresponding left speaker.
8 SERVICE/USB
Use the SERVICE port in conjunction with USB (Type B mini) to
manually load rmware to the CI 720. This is not for consumer use.
Only authorized service personnel can access this USB port and
SERVICE button.
9 SUBW OUT
Connect SUBW OUT to a powered subwoofer. Low frequency
information up to 150 Hz is sent to SUBW OUT.
10 LAN
A wired Ethernet connection is required to setup the CI 720. Using
the supplied Ethernet cable, connect one end of the Ethernet cable
to CI 720’s LAN port and the other end to the corresponding LAN
port of your wired Ethernet broadband router.
11 USB (Type A)
Connect a USB mass storage device to the USB input. Typical USB
mass storage device compatible with CI 720 include portable ash
memory devices and external hard drives (FAT32 recommended).
A notication will be shown in the App if a USB device is inserted.
Click on USB in the navigation drawer to browse content.
IDENTIFICATION OF CONTROLS
Network Stereo Zone Amplifier CI 720
© NAD CI720
© NAD CI720
100-120V
220-240V ~
50/60Hz
IR IN ANALOG IN
SUBW OUT
SERVICE USB
LAN/USB
L
+ +
L
R
R
SPEAKER OUTOPTICAL
IN
1
2
3
8
4
9
5
10
6
11
7
6
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSK A РУССКИЙ
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NAD CI720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NAD CI720 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NAD CI720

NAD CI720 User Manual - German - 8 pages

NAD CI720 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info